5秒后页面跳转
NX3DV3899 PDF预览

NX3DV3899

更新时间: 2024-01-19 14:16:50
品牌 Logo 应用领域
恩智浦 - NXP 开关
页数 文件大小 规格书
22页 600K
描述
Dual double-pole double-throw analog switch

NX3DV3899 数据手册

 浏览型号NX3DV3899的Datasheet PDF文件第2页浏览型号NX3DV3899的Datasheet PDF文件第3页浏览型号NX3DV3899的Datasheet PDF文件第4页浏览型号NX3DV3899的Datasheet PDF文件第5页浏览型号NX3DV3899的Datasheet PDF文件第6页浏览型号NX3DV3899的Datasheet PDF文件第7页 
NX3DV3899  
Dual double-pole double-throw analog switch  
Rev. 2 — 23 November 2010  
Product data sheet  
1. General description  
The NX3DV3899 is a dual double-pole double-throw analog data-switch suitable for use  
as an analog or digital multiplexer/demultiplexer. It consists of four switches, each with two  
independent input/outputs (nY0 and nY1) and a common input/output (nZ). The two digital  
inputs (1S and 2S) are used to select the switch position. Schmitt trigger action at the  
select input (nS) makes the circuit tolerant to slower input rise and fall times across the  
entire VCC range from 1.4 V to 4.3 V.  
A low input voltage threshold allows pin nS to be driven by lower level logic signals without  
a significant increase in supply current ICC. This makes it possible for the NX3DV3899 to  
switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level  
translation. The NX3DV3899 allows signals with amplitude up to VCC to be transmitted  
from nZ to nY0 or nY1; or from nY0 or nY1 to nZ.  
2. Features and benefits  
„ Wide supply voltage range from 1.4 V to 4.3 V  
„ Very low ON resistance (peak):  
‹ 7.2 Ω (typical) at VCC = 1.4 V  
‹ 5.4 Ω (typical) at VCC = 1.65 V  
‹ 2.9 Ω (typical) at VCC = 2.5 V  
‹ 2.4 Ω (typical) at VCC = 3.0 V  
‹ 2.3 Ω (typical) at VCC = 3.6 V  
‹ 2.2 Ω (typical) at VCC = 4.3 V  
„ Break-before-make switching  
„ High noise immunity  
„ ESD protection:  
‹ HBM JESD22-A114F Class 2A exceeds 2000 V (all pins)  
‹ HBM JESD22-A114F Class 3A exceeds 5000 V (I/O pins to GND)  
‹ MM JESD22-A115-A exceeds 200 V  
‹ CDM AEC-Q100-011 revision B exceeds 1000 V  
„ CMOS low-power consumption  
„ Latch-up performance exceeds 100 mA per JESD 78B Class II Level A  
„ 1.8 V control logic at VCC = 3.6 V  
„ Control input accepts voltages above supply voltage  
„ Very low supply current, even when input is below VCC  
„ High current handling capability (350 mA continuous current under 3.3 V supply)  
„ Specified from 40 °C to +85 °C and from 40 °C to +125 °C  

与NX3DV3899相关器件

型号 品牌 获取价格 描述 数据表
NX3DV3899GU NXP

获取价格

Dual double-pole double-throw analog switch
NX3DV3899GU,115 NXP

获取价格

NX3DV3899 - Dual double-pole double-throw analog switch QFN 16-Pin
NX3DV3899HR NXP

获取价格

Dual double-pole double-throw analog switch
NX3DV3899HR,115 NXP

获取价格

NX3DV3899 - Dual double-pole double-throw analog switch QFN 16-Pin
NX3DV42 NXP

获取价格

Dual high-speed USB 2.0 double-pole double-throw analog
NX3DV42GM NXP

获取价格

Dual high-speed USB 2.0 double-pole double-throw analog
NX3DV42GU NXP

获取价格

Dual high-speed USB 2.0 double-pole double-throw analog
NX3DV42GU10 NXP

获取价格

NX3DV42 - Dual high-speed USB 2.0 double-pole double-throw analog switch QFN 10-Pin
NX3DV42GU33 NXP

获取价格

Dual High-Speed USB 2.0 Double-Pole Double-Throw Analog Switch
NX3DV642GU NXP

获取价格

Three-Lane High-Speed MIPI-Compatible Switch