R Series Intelligent DAQ –
Data Acquisition and Control with Onboard Processing
Environmental
Safety and Compliance
NI 78xxR devices are intended for indoor use only.
Safety
Operating Environment
NI 781xR.............................................. 0 to 55 ꢀC (tested in
NI 78xxR devices are designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
accordance with IEC-60068-2-1
and IEC-60068-2-2)
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
NI 7830R, NI 7831R
40 or 80 MHz timebase.................. 0 to 55 ꢀC (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
NI 7833R/7841R/7842R/7851R/7852R/7853R/7854R
40 MHz timebase ........................... 0 to 55 ꢀC (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
80 MHz timebase ........................... 0 to 55 ꢀC except the
following: 0 to 45 ꢀC when
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards
for electrical equipment for measurement, control, and laboratory use:
• EN 61326 (IEC 61326): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
installed in an NI PXI-1000/B or
NI PXI-101x (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
• ICES-001: Class A emissions
Relative humidity range...................... 10 to 90%, noncondensing
(tested in accordance with
CE Compliance
IEC-60068-2-56)
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Altitude................................................ 2,000 m at 25 ꢀC
ambient temperature
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Storage Environment
Ambient temperature range ............... -20 to 70 ꢀC (tested in
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
accordance with IEC-60068-2-1
and IEC-60068-2-2)
Relative humidity range...................... 5 to 95%, noncondensing
(tested in accordance with
IEC-60068-2-56)
Environmental Management
Note: Clean the device with a soft, nonmetallic brush. Make sure that
the device is completely dry and free from contaminants before returning
it to service.
National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.
Shock and Vibration (for NI PXI-78xxR Only)
Operational shock ............................... 30 g peak, half-sine, 11 ms
For additional environmental information, refer to the NI and the
Environment Web page at ni.com/environment. This page contains the
environmental regulations and directives with which NI complies, as
well as other environmental information not included in this document.
pulse (tested in accordance
with IEC-60068-2-27; test
profile developed in accordance
with MIL-PRF-28800F)
Waste Electrical and Electronic Equipment (WEEE)
Random vibration
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
Operating ........................................ 5 to 500 Hz, 0.3 grms
Nonoperating.................................. 5 to 500 Hz, 2.4 grms
(tested in accordance with
IEC-60068-2-64; nonoperating test
profile exceeds the requirements
of MIL-PRF-28800F, Class 3)
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
7
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
