Sound and Vibration Data Acquisition
NI 9233, NI 9234 NEW!
• 24-bit resolution
• 102 dB dynamic range
• 4 simultaneous analog inputs
Supported Hardware Platforms
• NI CompactDAQ
• CompactRIO
•
5 V input range
• Hi-Speed USB carrier
• Wi-Fi/Ethernet carrier
• Antialiasing filters
• TEDS read/write
Recommended Software
• LabVIEW
• Sound and Vibration Toolkit
• Sound and Vibration Measurement Suite
Model
NI 9233
NI 9234
Max Sampling Rate
IEPE
Coupling
50 kS/s
51.2 kS/s
Always enabled (2 mA)
Software selectable
(0 or 2 mA)
AC coupling
Software selectable
AC/DC coupling
Table 1. NI C Series Dynamic Signal Acquisition Selection Guide
Overview
capability to read and write to transducer electronic data sheet (TEDS)
Class 1 smart sensors. NI 9233/9234 modules provide 30 V of overvoltage
protection (with respect to chassis ground) for IEPE sensor connections.
The NI 9234 has three software-selectable modes of measurement
operation: IEPE-on with AC coupling, IEPE-off with AC coupling, and
IEPE-off with DC coupling. IEPE excitation and AC coupling are not
software-selectable and are always enabled for the NI 9233.
NI 9233 and 9234 are 4-channel dynamic signal acquisition (DSA)
modules for making high-accuracy measurements from IEPE sensors.
These C Series analog input modules deliver 102 dB of dynamic range
and incorporate IEPE (2 mA constant current) signal conditioning for
accelerometers and microphones. The four input channels simultaneously
acquire at rates from 2 to 50 kHz or, with the NI 9234, up to 51.2 kS/s.
In addition, the modules include built-in antialiasing filters that
automatically adjust to your sampling rate. NI 9233/9234 modules
are ideal for a wide variety of mobile/portable applications such as
industrial machine condition monitoring and in-vehicle noise, vibration,
and harshness testing.
NI 9233/9234 modules use a method of A/D conversion known as
delta-sigma modulation. If, for example, the data rate is 25 kS/s, then
each ADC actually samples its input signal at 3.2 MS/s (128 times the
data rate) and produces samples that are applied to a digital filter.
This filter then expands the data to 24 bits, rejects signal components
greater than 12.5 kHz (the Nyquist frequency), and digitally resamples
the data at the chosen data rate of 25 kS/s. This combination of analog
and digital filtering provides an accurate representation of desirable
signals while rejecting out-of-band signals. The built-in antialiasing
filters automatically adjust themselves to discriminate between signals
based on the frequency range, or bandwidth, of the signal.
Hardware
Analysis Capabilities
Power spectra
Zoom FFTs
Fractional-octave analysis
Vibration level measurements
Order spectra
Transient analysis
Each simultaneous signal is buffered, analog
prefiltered, and sampled by a 24-bit delta-
sigma analog-to-digital converter (ADC) that
performs digital filtering with a cutoff
frequency that automatically adjusts to your
data rate. NI 9233/9234 modules feature a voltage range of 5 V and a
dynamic range of more than 100 dB. In addition, the modules include the
5秒后页面跳转
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
74HC573三态非易失锁存器(Latch)资料手册参数分析
MAX3232 RS-232电平转换器资料手册参数分析
MAX485 RS-485/RS-422收发器资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
