NCV81071
Dual 5 A High Speed
Low-Side MOSFET Drivers
with Enable
NCV81071 is a high speed dual low−side MOSFETs driver. It is
capable of providing large peak currents into capacitive loads. This
driver can deliver 5 A peak current at the Miller plateau region to help
reduce the Miller effect during MOSFETs switching transition. This
driver also provides enable functions to give users better control
capability in different applications. ENA and ENB are implemented
on pin 1 and pin 8 which were previously unused in the industry
standard pin−out. They are internally pulled up to driver’s input
voltage for active high logic and can be left open for standard
operations.
www.onsemi.com
MARKING
DIAGRAM
V71x
AYW
G
MSOP−8
Z SUFFIX
CASE 846AM
Features
• High Current Drive Capability 5 A
• TTL/CMOS Compatible Inputs Independent of Supply Voltage
• Industry Standard Pin−out
V71x = Specific Device Code
x = A, B or C
A
Y
W
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
• Enable Functions for Each Driver
• 8 ns Typical Rise and 8 ns Typical Fall Times with 1.8 nF Load
• Typical Propagation Delay Times of 20 ns with Input Falling and
20ꢀns with Input Rising
(Note: Microdot may be in either location)
• Input Voltage from 4.5 V to 20 V
PIN CONNECTIONS
• Dual Outputs can be Paralleled for Higher Drive Current
• Fully Specified from −40°C to +140°C
• AEC−Q100 Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
1
8
ENA
INA
ENB
OUTA
VDD
GND
INB
OUTB
Applications
(Top View)
• Server Power
• Telecommunication, Datacenter Power
• Synchronous Rectifier
• Switch Mode Power Supply
• DC/DC Converter
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 11 of this data sheet.
• Power Factor Correction
• Motor Drive
• Renewable Energy, Solar Inverter
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
August, 2017 − Rev. 0
NCV81071/D