MSM7580GS-K

更新时间： 2024-01-09 14:14:26

品牌	Logo	应用领域
冲电气 - OKI		转换器 PC
页数	文件大小	规格书
18页	207K
描述
暂无描述

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MSM7580GS-K 数据手册

¡ Semiconductor

MSM7580

PIN AND FUNCTIONAL DESCRIPTIONS

GND

Ground, 0 V.

SIP1, SOP1

PCM serial data input (SIP1) and output (SOP1) for Channel 1.

SOP1 is an open-drain output, which goes into a high impedance state after a continuous 8-bit

serial data output.

SIP2, SOP2

PCM serial data input (SIP2) and output (SOP2) for Channel 2.

SOP2 is an open-drain output, which goes into a high impedance state after a continuous 8-bit

serial data output.

PAD/ MUTE

Control input for the selection of PAD or MUTE mode.

Whendigital"1"isinput,thePADmodeisselectedandwhendigital"0"isinput,theMUTEmode

is selected.

THR1, THR2

Control pins for the data through modes.

THR1 and THR2 are for Channel 1 and Channel 2, respectively. The data-through mode is

selected when digital “1” is applied to THR1 and THR2. In this mode, 8-bit serial input data

applied to SIA1 and SIA2 (ADPCM data input) is passed to the PCM serial data output pins,

SOP1 and SOP2, without any data modification. SOP1 and SOP2 go to the high impedance state

after the output of 8-bit data has been applied to SIA1 and SIA2.

Conversely 8-bit serial input data applied to SIP1 and SIP2 (PCM data input) is passed to

ADPCM serial data output pins, SOA1 and SOA2, without any data modification.

SOA1 and SOA2 go to the high impedance state after the output of 8-bit data has been applied

to SIP1 and SIP2.

Since ADPCM and PCM data interfaces have the mutually independent signal input pins for

synchronizing signals the time slots for data input and output can be exchanged between them.

Sometimingatwhichdatamaybedeletedorduplicatedasdescribedin"NotesonUsage"should

not be used.

MUTE1, MUTE2

Setting a digital "1"at these pins sets the PCM output to the idle pattern state regardless of the

ADPCM input data, when the MUTE mode is selected by the PAD/MUTE pin.

When the PAD mode is selected, the PCM output has a 12 dB loss.

Normally, these pins are set to a digital "0".

When the data through mode is selected, the function of these pins is invalid.

4/17

1 2 345 6 7...18

下载PDF

与MSM7580GS-K相关器件

型号	品牌	描述	获取价格	数据表
MSM7581	OKI	ITU-T G.721 4ch ADPCM TRANSCODER	获取价格
MSM7581TS-K	OKI	暂无描述	获取价格
MSM7582	OKI	pie/4 Shift QPSK MODEM	获取价格
MSM7582B	OKI	pie/4 Shift QPSK MODEM	获取价格
MSM7582TS-K	OKI	Modem, 384kbps Data, CMOS, PDSO32, 8 X 14 MM, 0.50 MM PITCH, PLASTIC, TSOP1-32	获取价格
MSM7583	OKI	pie/4 Shift QPSK MODEM	获取价格