MPQ6527
40V, 0.8A, 10-Channel Half-Bridge
Motor Driver with Serial Input Control,
AEC-Q100 Qualified
DESCRIPTION
FEATURES
Wide 5.5V to 40V Operating Input Range
High-Side and Low-Side Drivers Connected
in Half-Bridge Configurations
Up to 0.8A Output Current
RDS(ON) (HS-FET and LS-FET), Typically
1.3Ω
The MPQ6527 is a ten-channel half-bridge
DMOS output driver with integrated power
MOSFETs. The device has a 5.5V to 40V input
voltage range, with a maximum 0.8A of output
current capability.
The device’s ten half-bridges can be controlled
separately from a standard serial data interface,
and each channel has various diagnostic
functions. The MPQ6527 has very low quiescent
current in standby mode.
Very Low Quiescent Current in Standby
Mode vs. Total Temperature Range
Output Short-Circuit Protection (SCP)
Over-Temperature Protection (OTP) and
Pre-Warning
Under-Voltage (UV) and Over-Voltage
Lockout (OVLO)
Full protection includes short-circuit protection
(SCP), under-voltage protection (UVP), and
thermal shutdown.
Serial Data Interface
Various Diagnostic Functions: Shorted
Output, Open Load, and Over-Temperature,
Over-Voltage, and Under-Voltage
Conditions
Serial Interface Clock Frequency Up to
5MHz
The MPQ6527 requires a minimal number of
readily available, standard external components,
and is available in a TSSOP-28 EP package.
Compliance with 3.3V and 5V Systems
Available in a TSSOP-28 EP Package
Available in AEC-Q100 Grade 1
APPLICATIONS
Drive Various Loads in Automotive and
Industrial Applications
DC Motors
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPQ6527 Rev. 1.0
9/23/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1