MPQ6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY VOLTAGE SUPERVISOR
ORDERING INFORMATION
Product
Package
Top Marking
Nominal Supply Voltage
Threshold Voltage (VIT)
MPQ6400DG-33
MPQ6400DG-01
MPQ6400DJ-33
MPQ6400DJ-01
QFN
QFN
TSOT23-6
TSOT23-6
9R
5B
3S
4B
3.3V
3.3V
3.3V
3.3V
3.07V
Adjustable
3.07V
Adjustable
PIN FUNCTIONS
Pin #
Name Description
QFN-6 TSOT23-6
Supply voltage. A 0.1uF decoupling ceramic capacitor should be put close to this
pin.
1
2
6
5
VCC
SENSE pin is connected to the monitored system voltage. When the monitored
SENSE
voltage is below desired threshold,
is asserted.
RESET
Programmable reset delay time pin. When CDELAY connected to VCC through a
resistor between 50kΩ and 200kΩ, a 380ms delay time is selected. When CDELAY
floated, the delay time is 24ms. A capacitor bigger than 150pF connected CDELAY to
GND could be used to get the user’s programmable time from 2.1ms to 10s.
3
4
CDELAY
The manual reset (
) can introduce another logic signal to control the
. It is
RESET
MR
internally connected to VCC through a 90kΩ resistor.
4
5
3
2
MR
GND Ground.
is an open drain signal which will be asserted when the SENSE voltage
RESET
drops below a preset threshold or when the manual reset (
) pin drops to a logic
MR
6
1
RESET
low. The
delay time is programmable from 2.1ms to 10s by using external
RESET
capacitors. A pull-up resistor bigger than 10k should be connected this pin to
supply line, and the outputting a higher voltage than VCC is allowable.
RESET
DETAIL DESCRIPTION
The MPQ6400 product family asserts a
output remains asserted for a user’s
RESET
RESET
signal when either the SENSE pin voltage is
programmable delay time. Two fixed
delay
RESET
lower than V or the manual reset ( ) is driven
MR
times are user-selectable: 380ms delay time by
connecting the CDELAY pin to VCC, and 24ms delay
time by leaving the CDELAY pin float. Any delay
time from 2.1ms to 10s could be gotten by
connecting a capacitor between CDELAY and GND.
The wide monitor voltage and programmable
reset delay time make MPQ6400 product family
suitable for a broad array of applications.
IT
low. The MPQ6400-XX family, other than the
MPQ6400DG(J)-01, can monitor a fixed voltage
from 0.9V to 5.0V. The MPQ6400DG(J)-01 can
monitor any voltage above 0.4V by adjusting the
external resistor divider. After both the manual
reset (
thresholds,
) and SENSE voltages exceed their
the
MR
MPQ6400 Rev. 1.2
10/23/2023
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2023 MPS. All Rights Reserved.
6