5秒后页面跳转
MP8801DJ-2.5-LF PDF预览

MP8801DJ-2.5-LF

更新时间: 2024-02-19 10:23:31
品牌 Logo 应用领域
芯源 - MPS 光电二极管输出元件调节器
页数 文件大小 规格书
9页 232K
描述
Fixed Positive LDO Regulator, 2.5V, PMOS, PDSO5, ROHS COMPLIANT, MO-193AA, TSOT-23, 5 PIN

MP8801DJ-2.5-LF 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:TSOT
包装说明:VSSOP,针数:6
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:12 weeks
风险等级:5.18最大输入电压:6.5 V
最小输入电压:2.7 VJESD-30 代码:R-PDSO-G5
JESD-609代码:e3长度:2.9 mm
湿度敏感等级:1功能数量:1
端子数量:5工作温度TJ-Max:150 °C
最大输出电流 1:0.15 A最大输出电压 1:2.55 V
最小输出电压 1:2.45 V标称输出电压 1:2.5 V
封装主体材料:PLASTIC/EPOXY封装代码:VSSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
峰值回流温度(摄氏度):260认证状态:Not Qualified
调节器类型:FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR座面最大高度:1 mm
表面贴装:YES技术:PMOS
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.95 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:1.6 mm
Base Number Matches:1

MP8801DJ-2.5-LF 数据手册

 浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第3页浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第4页浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第5页浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第7页浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第8页浏览型号MP8801DJ-2.5-LF的Datasheet PDF文件第9页 
MP8801 – LOW DROPOUT, 150mA LINEAR REGULATOR  
Input Capacitor Selection  
APPLICATION INFORMATION  
Setting the Output Voltage  
The fixed output voltage of the MP8801DJ is set  
to 2.5V, 2.85V or 3.3V, depending on the  
internal resistor divider (Figure 1). You can also  
adjust the output voltage by using an external  
resistor divider (R1 and R2 in Figure 2).  
However, the sum of R1 and R2 should not  
exceed 100kin order to minimize the impact  
of the internal resistor divider. For an accurate  
output-voltage setting, use 10k(±1%) for the  
low-side resistor R2 of the voltage divider, while  
the high-side resistor R1 can be determined by  
the equation:  
For proper operation, place a ceramic capacitor  
(C1) between 1µF and 10µF of dielectric type  
X5R or X7R between the input pin and ground.  
Larger values in this range will help improve  
line transient response at the drawback of  
increased size.  
Output Capacitor Selection  
For stable operation, use a ceramic capacitor  
(C3) of type X5R or X7R between 1µF and  
10µF. Larger values in this range will help  
improve load transient response and reduce  
noise with the drawback of increased size.  
Output capacitors of other dielectric types may  
be used, but are not recommended as their  
capacitance can deviate greatly from their rated  
value over temperature.  
VOUT VFB  
R1 = R2×  
VFB  
Where VFB is the OUT feedback threshold  
voltage equal to 1.222V.  
To improve load transient response, add a  
small ceramic (X5R, X7R or Y5V dielectric)  
100nF feed forward capacitor in parallel with R1.  
The feed forward capacitor is not required for  
stable operation.  
Example: For 2.5V Output  
2.5V 1.222V  
R1=  
= 10.41kΩ  
1.222V  
10kΩ  
You can select a standard 10.5k(±1%)  
resistor for R1.  
The following table lists the selected R1 values  
for some typical output voltages:  
Table 1—Adjustable Output Voltage R1 Values  
R2 ()  
VOUT (V)  
1.25  
1.5  
1.8  
2
R1 ()  
232  
2.26k  
4.75k  
6.34k  
10.5k  
13k  
2.5  
2.8  
3
10k  
14.7k  
16.9k  
22.6k  
30.9k  
3.3  
4
5
In Figures 3 and 4, C2 is added for an improved  
transient response.  
MP8801 Rev. 1.9  
10/10/2011  
www.MonolithicPower.com  
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.  
© 2011 MPS. All Rights Reserved.  
6

与MP8801DJ-2.5-LF相关器件

型号 品牌 描述 获取价格 数据表
MP8801DJ-2.5-LF-Z MPS 暂无描述

获取价格

MP8801DJ-2.5-Z MPS Fixed Positive LDO Regulator, 2.5V, PMOS, PDSO5, MO-193AA, TSOT-23, 5 PIN

获取价格

MP8801DJ2.85 MPS Low Dropout 150mA Linear Regulator

获取价格

MP8801DJ-2.85 MPS Low Dropout 150mA Linear Regulator

获取价格

MP8801DJ-2.85-LF MPS Fixed Positive LDO Regulator, 2.85V, PMOS, PDSO5, ROHS COMPLIANT, MO-193AA, TSOT-23, 5 PIN

获取价格

MP8801DJ-2.85-Z MPS Fixed Positive LDO Regulator, 2.85V, PMOS, PDSO5, MO-193AA, TSOT-23, 5 PIN

获取价格