MP2678
Li-Ion Battery Charger
Protection Circuit With LDO Mode
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP2678 is a high performance single cell
Li-Ion/Li-Polymer battery charger protection IC.
By integrating the high voltage input protection,
the MP2678 can tolerate an input surge up to
+30V.
•
•
•
•
•
•
•
•
•
•
Input Surge up to 30V
Input Over Voltage Protection
Proprietary Battery Over-Voltage Protection
Output Short-Circuit Protection
Soft-Stop to Prevent Voltage Spikes
Support up to 1.7A Load Current
Thermal Monitoring and Protection
Enable Function
The device operates like a linear regulator,
maintaining a 5V output with the input voltage
up to the over voltage protection threshold.
Fault Indication
2 mm×2mm QFN Package
MP2678 features input over voltage protection
(OVP), battery over voltage protection (BOVP)
and over charge current protection (OCP).
When any fault condition happens, the IC will
immediately turn off the internal N-MOSFET to
disconnect the charging circuit from the input.
The device also provides fault indications to the
system when any of the protection events
happens.
APPLICATIONS
•
•
•
•
•
Cell Phones
Smart Phones
PDAs
MP3 Players
Low-Power Handheld Devices
For guaranteed safe operation, the MP2678
monitors its own internal temperature and turns
off the internal N-MOSFET bridging IN and
OUT when the die temperature exceeds 140oC.
For MPS green status, please visit MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
The MP2678 is available in an 8-pin 2mm x
2mm QFN package.
TYPICAL APPLICATION CIRCUIT
LINEAR
V
IN
BATTERY
VIN
CE
OUT
3.3V~VOVP
CHARGER
VIN
MP2678
COUT
VB
On
Off
RVB
FLT
GND
RFLT
Battery
Pack
MP2678 Rev. 1.0
1/6/2011
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.
1