MM22, MM24
www.vishay.com
Vishay Dale
ORDERING INFORMATION
CONNECTOR
HARDWARE
R
D1
B
P
G
026 (1)
C
MM
22
-
5
CONTACTS
MODEL TERMINATION (OPTIONAL) CONTACT CONTACT PLATING
(OPTIONAL) HARDWARE
VARIATIONS
NUMBER OF
CONTACTS
STYLE
SIZE
Microminiature
R = Reversed guides
or screwlocks
(Omit for standard)
P = Pin
S = Socket
B = Beryllium copper
contacts optional on
solder cup socket
contacts only.
22 AWG = 0.030"
[0.762 mm] diameter
24 AWG = 0.025"
[0.635 mm] diameter
(Omit for standard
contacts)
(OPTIONAL)
Optional plating available:
Dip solder termination optional.
(Omit for standard solder cup)
Select tail length:
G = Gold (0.00003 thick) over Nickel
G5 = Gold (0.00005 thick) over Nickel
Omit designator for gold
D1 = 0.160" [4.06 mm] nominal
D2 = 0.350" [8.89 mm] nominal
(0.00001 thick) over Nickel
5, 7, 9, 11, 14, 18, 20, 26, 29, 34, 44 or 50 (2)
(OPTIONAL)
Closed entry socket contacts
optional on 22 AWG socket
contacts only.
(Omit if no hardware desired)
026 = Slotted brass guides 0.078" [1.98 mm] diameter
026L = Long slotted brass guides 0.078" [1.98 mm] diameter
027 = Slotted cres guides 0.078" [1.98 mm] diameter
027L = Longslotted cres guides 0.078" [1.98 mm] diameter
SL = Chassis mounted fixed screwlocks (3-48 thread)
SL2 = Chassis mounted fixed screwlocks (2-56 thread)
SLL = Chassis mounted fixed screwlockslong (3-48 thread)
SL2L = Chassis mounted fixed screwlockslong (2-56 thread)
NSL = Chassis mounted fixed screwlocks (3-48 thread)
with nylon retaining nuts and fiber washers
(Omit for standard contacts)
NSL2 = Chassis mounted fixed screwlocks (3-48 thread)
with nylon retaining nuts and fiber washers
SK = Cable mounted - turnable screwlocks (3-48 thread)
SK2 = Cable mounted - turnable screwlocks (2-56 thread)
SK030 = Cable mounted - turnable screwlocks (3-48 thread)
with short knobs
SK2030 = Cable mounted - turnable screwlocks (2-56 thread)
with short knobs
SK2035 = Cable mounted - tunable screwlocks (2-56 thread)
with socket head knobs
Notes
(1)
To order complete connector with hardware supplied unassembled, add suffix “UA” on end of hardware designation.
ꢀ0 contact connectors are available in either the standard 4-row contact arrangement per MIL-C-28748 or a special ꢀ-row contact
arrangement. To order the special ꢀ-row contact arrangement, use the designator “Cꢀ0” for the number of contacts.
(2)
Revision: 24-Feb-14
Document Number: 36008
6
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000