NXP Semiconductors
MKW36Z512
Data Sheet: Technical Data
Rev. 8, 05/2020
MKW36Z/35Z Data Sheet
MKW36Z512VHT4
MKW36Z512VFP4
MKW35Z512VHT4
An ultra low power, highly integrated Bluetooth® Low
Energy 5.0 wireless microcontroller
48 LQFN
40 "Wettable" HVQFN
7x7 mm Pitch 0.5 mm 6x6 mm Pitch 0.5 mm
Multi-Standard Radio
System peripherals
• 2.4 GHz Bluetooth Low Energy (Bluetooth LE) version
5.0 compliant supporting up to 8 simultaneous
hardware connections
• Nine MCU low-power modes to provide power
optimization based on application requirements
• DC-DC Converter supporting Buck and Bypass
operating modes
• Generic FSK modulation
• Data Rate: 250, 500 and 1000 kbps
• Modulations: GFSK BT = 0.3, 0.5, and 0.7;
FSK/MSK
• Direct memory access (DMA) Controller
• Computer operating properly (COP) watchdog
• Serial wire debug (SWD) Interface and Micro Trace
buffer
• Modulation Index: 0.32, 0.5, 0.7, and 1.0
Typical Receiver Sensitivity
(Bluetooth LE 1 Mbps) = –95 dBm
Typical Receiver Sensitivity
•
•
• Bit Manipulation Engine (BME)
Analog Modules
• 16-bit Analog-to-Digital Converter (ADC)
• 6-bit High Speed Analog Comparator (CMP)
• 1.2 V voltage reference (VREF)
(250 kbps GFSK-BT=0.5, h=0.5) = –99 dBm
• Programmable Transmitter Output Power:
–30 dBm to 5 dBm
• Low external component counts for low cost application
• On-chip balun with single ended bidirectional RF port
Timers
• 16-bit low-power timer (LPTMR)
• 3 Timer/PWM Modules(TPM): One 4 channel TPM
and two 2 channel TPMs
• Programmable Interrupt Timer (PIT)
• Real-Time Clock (RTC)
MCU and Memories
• 256 KB program flash memory plus 256 KB FlexNVM
on KW36Z
• 8 KB FlexRAM supporting EEPROM emulation on
KW36Z
• 512 KB program flash memory on KW35Z
• Up to 48 MHz Arm® Cortex®-M0+ core
• On-chip 64 KB SRAM
Communication interfaces
• 2 serial peripheral interface (SPI) modules
• 2 inter-integrated circuit (I2C) modules
• Low Power UART (LPUART) module with LIN
support (2x LPUART on KW36Z)
Low Power Consumption
• Carrier Modulator Timer (CMT)
• Transceiver current (DC-DC buck mode, 3.6 V supply)
• FlexCAN module (with CAN FD support up to 3.2
Mbps baudrate) on KW36Z
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.