Not for New Designs - Alternative Device: MKP385
MKP1837
Vishay Roederstein
www.vishay.com
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = w + Δw
Eccentricity
Imax. = I + Δl
hmax. = h + Δh
Seating plane
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - Δl, wmin. = w - Δw and hmin. = h - Δh following
• For products with pitch ≤ 10 mm, Δl = 0.3 mm and Δw = Δh = 0.3 mm
• For products with pitch = 1ꢀ mm, Δl = 0.ꢀ mm and Δw = Δh = 0.ꢀ mm
• For products with 1ꢀ mm < pitch ≤ = 27.ꢀ mm, Δl = 1.0 mm and Δw = Δh = 0.ꢀ mm
• For products with pitch = 37.ꢀ mm, Δl = 1.0 mm and Δw = Δh = 1.0 mm
• For products with pitch = ꢀ2.ꢀ mm, Δl = 1.ꢀ mm and Δw = Δh = 1.0 mm
CHARACTERISTICS
102
101
100
0.01
0.022
101
Capacitance in μF
100
0.
1
10-1
10-2
10-3
10-1
10-2
160 VDC
103
104
10ꢀ
106
107
f [Hz]
0.01
0.0ꢀ 0.1
0.ꢀ 1.0
ꢀ.0 10
ꢀ0 100
f [MHz]
Permissible AC Voltage vs. Frequency
Impedance vs. Frequency Z = f(f)
(Lead Length 2.0 mm)
Revision: 27-Sep-2021
Document Number: 26017
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000