MIC2033
High-Accuracy, High-Side, Fixed
Current Limit Power Switch
General Description
Features
The MIC2033 is a high-side MOSFET power distribution
switch providing increased system reliability utilizing 5%
current limit accuracy.
• ±5% current limit accuracy
• Input supply range from 2.5V to 5.5V
• Low quiescent current: 100µA typical (switch ON)
• 75mΩ typical RDS(ON) at 5V
• Current limit options: 0.5A, 0.8A, 1A, and 1.2A
• Soft-start control via an external capacitor
• Undervoltage lockout (UVLO)
• Fast response time (10µs) to short circuit loads
• Fault status output flag
• Logic controlled enable (active-high, active-low)
• Thermal shutdown
The MIC2033 has an operating input voltage range from
2.5V to 5.5V, is internally current limited and has thermal
shutdown to protect the device and system. The MIC2033
is offered with either active-high or active-low logic level
enable input controls, has an open drain fault status output
flag with a built-in 32ms delay that asserts low during over
current or thermal shutdown conditions.
The MIC2033 is available in several different fixed current
limit options: 0.5A, 0.8A, 1A, and 1.2A. A capacitor
adjustable soft-start circuit minimizes inrush current in
applications where high capacitive loads are used.
• Pin compatible with MIC2005
The MIC2033 is offered in both 6-pin SOT-23 and 6-pin
2mm x 2mm thin DFN packages. The MIC2033 has an
operating junction temperature range of −40°C to +125°C.
• 6-pin 2mm × 2mm thin DFN and 6-pin SOT-23
packages
• Junction temperature range from −40°C to +125°C
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Applications
• USB peripherals and USB 2.0/3.0 compatible
• DTV/STB
• Notebooks and consumer electronics
• General purpose power distribution
____________________________________________________________________________________________________________
Typical Application
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Revision 1.1
November 11, 2015