Datasheet > MHR18FGJ01.000

MHR18FGJ01.000

更新时间： 2024-01-08 06:29:07

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

MHR18FGJ01.000 数据手册

MHR Series HCMOS/TTL

Compatible Oscillators

MHR Series HCMOS/TTL

Compatible Plastic Package

Surface Mount Oscillators

* Consult factory regarding availability of B and C symmetry codes.

Electrical Specifications

NOTE: A capacitor of value 0.01 mF or greater between

Vdd and Ground is recommended.

Pin Connections

Tri-state Control Logic

Pin 1 high or floating: clock signal output.

Pin 1 low: output disabled to high impedance.

Available Stabilities

vs. Temperature

A = Available

N = Not Available

S = Standard

C = Consult Factory

¹Because this product is based on AT-strip technology, not all frequencies in the range stated are available.

Contact the factory for availability of specific frequencies.

²TTL load - See load circuit diagram #1 on page 137. HCMOS load - See load circuit diagram #2 on page 137.

³Symmetry is measured at 1.4 V with TTL load, and at 50% Vdd with HCMOS load.

Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd

with HCMOS load.

See page 136, Figure 2 for suggested solder profile.

下载PDF

型号	品牌	描述	获取价格	数据表
MHR18FGJ50.0010MHZ	MTRONPTI	HCMOS Output Clock Oscillator, 50MHz Min, 80MHz Max, 50.001MHz Nom, J-LEADED, 4 PIN	获取价格
MHR18FGJ67.0000MHZ	MTRONPTI	HCMOS Output Clock Oscillator, 67MHz Nom, J-LEADED, 4 PIN	获取价格
MHR18FGJ67.0010MHZ	MTRONPTI	HCMOS Output Clock Oscillator, 67.001MHz Nom, J-LEADED, 4 PIN	获取价格
MHR18FGJ80.000	MTRONPTI	Oscillator	获取价格
MHR18FGJFREQ1	MTRONPTI	HCMOS Output Clock Oscillator, 50.001MHz Min, 67MHz Max	获取价格
MHR18FGJ-R	MTRONPTI	9x14 mm, 5.0 Volt, HCMOS/TTL, Clock Oscillator	获取价格