5秒后页面跳转
MCS1800 PDF预览

MCS1800

更新时间: 2024-04-09 19:01:10
品牌 Logo 应用领域
芯源 - MPS 传感器
页数 文件大小 规格书
19页 914K
描述
3.3V、线性霍尔效应电流传感器,宽温范围内的精度为 ±3%

MCS1800 数据手册

 浏览型号MCS1800的Datasheet PDF文件第2页浏览型号MCS1800的Datasheet PDF文件第3页浏览型号MCS1800的Datasheet PDF文件第4页浏览型号MCS1800的Datasheet PDF文件第5页浏览型号MCS1800的Datasheet PDF文件第6页浏览型号MCS1800的Datasheet PDF文件第7页 
MCS1800  
DESCRIPTION  
FEATURES  
The MCS1800 is a linear Hall-effect current  
sensor for AC or DC current sensing. The Hall  
array is differential, which cancels out any stray  
magnetic field.  
3.3V Single Supply  
Immune to External Magnetic Fields by  
Differential Sensing  
200VRMS Working Voltage for Basic Isolation  
Operating Temperature: -40°C to +125°C  
1.2Internal Conductor Resistance  
±12.5A and ±25A Range  
Adjustable Bandwidth Up to 100 kHz  
4μs Output Rising Time  
Ratiometric Output from Supply Voltage  
Output Proportional to AC or DC Currents  
Factory-Trimmed for Accuracy  
No Magnetic Hysteresis  
Integrated Shield Suppressing Capacitive  
Coupling from Current Conductor to Die (Up  
to 10V/ns)  
A primary conductor with a low resistance allows  
current to flow close to the IC, which contains  
high-accuracy Hall-effect sensors. This current  
generates a magnetic field that is sensed at two  
different points by the integrated Hall-effect  
transducers. The magnetic field difference  
between these two points is then converted into  
a voltage that is proportional to the applied  
current. A spinning current technique is used for  
a low stable offset.  
The galvanic isolation between the pins of the  
primary conductive path and the sensor leads  
allows the MCS1800 to replace opto-isolators or  
other isolation devices.  
Available in an SOIC-8 Package  
APPLICATIONS  
The MCS1800 requires a minimal number of  
readily available, standard external components.  
The device’s small footprint saves board area  
and makes it well-suited for space-constrained  
applications. The MCS1800 is available in an  
SOIC-8 package.  
Motor Control  
Automotive Systems  
Load Detection and Management  
Switch-Mode Power Supplies  
Over-Current Fault Protection  
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.  
For MPS green status, please visit the MPS website under Quality Assurance.  
“MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of  
Monolithic Power Systems, Inc. or its subsidiaries.  
TYPICAL APPLICATION  
MCS1800  
3.3V  
8
VCC  
1
2
IP+  
IP+  
CBYP  
0.1µF  
VOUT  
7
VOUT  
IP  
3
4
6
5
IP-  
IP-  
FILT  
GND  
CF  
Note:  
1) VOUT is proportional to IP within the specified range. The noise vs. bandwidth tradeoff can be adjusted by connecting a capacitor (CF) between  
FILT and GND.  
MCS1800 Rev. 1.0  
4/13/2021  
MonolithicPower.com  
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.  
© 2021 MPS. All Rights Reserved.  
1

与MCS1800相关器件

型号 品牌 获取价格 描述 数据表
MCS1801 MPS

获取价格

5V、线性霍尔效应电流传感器,宽温范围内的精度为 ±3%
MCS1802 MPS

获取价格

3.3V、线性霍尔效应电流传感器,宽温范围内的精度为 ±2.5%
MCS1803 MPS

获取价格

5V、线性霍尔效应电流传感器,宽温范围内的精度为 ±2.5%
MCS1806 MPS

获取价格

耐压达3kVRMS?的隔离式霍尔效应电流传感器,工作电压为 500VRMS, 精度为 ±2
MCS2 ETC

获取价格

PHOTON COUPLED ISOLATOR Ga As INFRARED EMITTING DIODE AND LIGHT ACTIVATED SCR
MCS21 GE

获取价格

PHOTON COUPLED ISOLATOR
MCS221D NIDEC

获取价格

Sub-miniature Slide Switches
MCS221DD NIDEC

获取价格

Sub-miniature Slide Switches
MCS221E NIDEC

获取价格

Sub-miniature Slide Switches
MCS221EA NIDEC

获取价格

Sub-miniature Slide Switches