MCR series
●Chip resistor dimensions and markings
■MCR004 / 006 / 01 / 03
Datasheet
■MCR10 / 18 / 25 / 50 / 100
<Marking method>
There are three or four digits used for the calculation
number according to IEC code and R is used for the
decimal point.
(Unit:mm)
Marking
Part No.
Type code
QLP
(mm)
(inch)
L
W
t
a
b
existence
MCR004
0402
01005
0.40±0.02
0.20±0.02
0.13±0.02
0.10±0.03
0.10±0.03
No
No
MCR006
MCR01
YLP
MZP
EZP
EZP
EZP
JZH
JZH
JZH
0603
1005
1608
2012
3216
3225
5025
6432
0201
0402
0603
0805
1206
1210
2010
2512
0.60±0.03
1.00±0.05
1.60±0.10
2.00±0.10
3.20±0.15
3.20±0.15
5.00±0.15
6.30±0.15
0.30±0.03
0.50±0.05
0.80±0.10
1.25±0.10
1.60±0.15
2.50±0.15
2.50±0.15
3.20±0.15
0.23±0.03
0.35±0.05
0.45±0.10
0.55±0.10
0.55±0.10
0.55±0.10
0.55±0.15
0.55±0.15
0.10±0.05
0.20±0.10
0.30±0.20
0.40±0.20
0.50±0.25
0.50±0.25
0.60±0.25
0.60±0.25
0.15±0.05
+0.05
0.25
No
-0.10
MCR03
0.30±0.20
0.40±0.20
0.50±0.25
0.50±0.25
0.60±0.25
0.60±0.25
Yes*
Yes
Yes
Yes
Yes
Yes
MCR10
MCR18
▲MCR25
▲MCR50
▲MCR100
Marking method of jumper type
Jumper type
Marking existence
MCR004 / 006 / 01 / 25 / 50 / 100
MCR03 / 10 / 18
No
Yes
*Marking method of MCR25/50/100
Blueglass over coat is used for the jumper type.There is no marking on the jumper type.
*Marking method of MCR03
For MCR03 series resistors, the printingprocess restricts the marking to three digits/characters. Consequently, 1%tolerance resistors
with values fromthe E24 series will be markedthe same as 5%resistors with the same value, but 1%tolerance resistors
with values fromthe E96 series will not bemarked. However, regarding E96 series, the resistance values which overlaps
with E24 series will be indicated by 3 digits.
Examples:
MCR03EZPJ243
(5%tolerance, E24 / 24 kΩ)
(1%tolerance, E24 / 24 kΩ)
(1%tolerance, E96 / 24.3 kΩ)
(1%tolerance, E24,E96 / 200Ω)
Marking =243
Marking =243
No Marking
MCR03EZPFX2402
MCR03EZPFX2432
MCR03EZPFX2000
Marking =201
MCR18EZPJ243
MCR18EZPF2402
MCR18EZPF2432
(5%tolerance, E24 / 24 kΩ)
(1%tolerance, E24 / 24 kΩ)
(1%tolerance, E96 / 24.3 kΩ)
Marking =243
Marking =2402
Marking =2432
www.rohm.com
©2020 ROHMCo., Ltd.All rights reserved.
3/6
2020.07 - Rev.Q