Datasheet > MCH285S/883

MCH285S/883

更新时间： 2024-02-04 23:44:35

品牌	Logo	应用领域
CRANE		转换器输入元件
页数	文件大小	规格书
8页	167K
描述
DC/DC CONVERTERS 28 VOLT INPUT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MCH285S/883 数据手册

FEATURES

• -55°C to +125°C operation

• 12 to 50 VDC input

• Fully isolated

MCH SERIES

1.5 WATT

DC/DC CONVERTERS

28 VOLT NPUT

• Magnetic feedback

MODELS

VDC OUTPUT

• Fixed frequency 370 kHz typ.

• Topology – Current Mode Flyback

• 80 V for up to 120 ms transient protection

(70 V for 15 V single and dual models)

• Inhibit function

SINGLES

DUALS

5.2

• Short circuit protection

• Undervoltage lockout

Size (max.): 0.980 x 0.805 x 0.270 inches (24.89 x 20.45 x 6.86 mm)

Weight: 12 grams max.

Screening: Standard, ES, or 883 (Class H)

DESCRIPTION

With a miniature footprint of just 0.8 square inches, the MCH

Series™ of DC/DC converters delivers 1.5 watts of output power

while saving significant board real estate. The wide input voltage

range of 12 to 50 VDC accepts the varying voltages of military, aero-

space, or space bus power and tightly regulates output voltages to

protect downstream components. Transient protection of 80 volts for

up to 120 milliseconds exceeds the requirements of MIL-STD-704A

for the 5, 5.2, and 12 volt single models and the 12 volt dual model.

The 15 volt single and dual converters will withstand transients of up

to 70 volts for up to 120 milliseconds.

INHIBIT FUNCTION

When an open collector TTL logic low is applied to the inhibit

terminal, pin 7, the converter shuts down and lowers the output

voltage to near zero and input current to as low as 2.3 mA. Leaving

the terminal open or applying an open collector TTL logic high will

enable the converter.

PROTECTION FEATURES

Undervoltage lockout prevents the MCH Series converters from

operating below approximately 8 VDC input voltage to keep system

current levels smooth, especially during initialization or re-start oper-

ations. All models include a soft-start function to prevent large

current draw and minimize overshoot. The converters also provide

short circuit protection by restricting the current.

CONVERTER DESIGN

MCH Series DC/DC converters incorporate a continuous flyback

topology with a constant switching frequency of approximately 370

kHz. Current-mode pulse width modulation (PWM) provides output

voltage regulation. Output error voltage is magnetically fed back to

the input side of the PWM to regulate output voltage. Regulation is

also affected by the load; refer to the Electrical Characteristics

tables on the following pages.

MIL-STD-461

Use Interpoint’s FMSA-461 EMI filter to pass the CE03 requirements

of MIL-STD-461C.

CONVENIENT PACKAGING

Dual models regulate the negative output with magnetic coupling to

the positive output. Up to 80% of the total load may be on one output

providing that the other output carries a minimum of 20% of the total

load. The dual models can be used at double the output voltage by

connecting the load between positive and negative outputs, leaving

the common unconnected. (ex: MCH2805D can be used as a 10

VDC output.)

The MCH Series converters are packaged in hermetically sealed,

projection-welded metal cases which provide EMI/RFI shielding.

POSITIVE

INPUT

0.47 µF

typical

+V_IN

POSITIVE

OUTPUT

PWM

SHUTDOWN

INHIBIT

CONTROLLER

+V_OUT

OUTPUT

COMMON

INPUT

NEGATIVE

OUTPUT

COMMON

DUAL MODELS ONLY

FIGURE 1: BLOCK DIAGRAM

12 3 4 5 6 7 8

中文翻译

下载PDF

与MCH285S/883相关器件

型号	品牌	获取价格	描述	数据表
MCH2890R	FREESCALE	获取价格	DUAL POWER DRIVER
MCH2XXX	ROHM	获取价格	2012(0805)Size chip capacitors : MCH21
MCH3007	SANYO	获取价格	High-Frequency Low-Noise Amplifi er
MCH3007-TL-H	ONSEMI	获取价格	射频晶体管，NPN 单，12 V，30 mA，fT = 8 GHz
MCH3008	TELEDYNE	获取价格	1 TO 3400 MHz TO-8H TRIPLE-MCH3008 BALANCED MIXER
MCH3009	TELEDYNE	获取价格	1 TO 3400 MHz TO-8H TRIPLE-MCH3009 BALANCED MIXER
MCH305027-60.000MHZ	MMD	获取价格	Oscillator,
MCH305027A-1.250MHZ	MMD	获取价格	Oscillator,
MCH305027A-60.000MHZ	MMD	获取价格	Oscillator,
MCH305048A-60.000MHZ	MMD	获取价格	Oscillator,

与MCH285S/883相关文章

BSS123LT1资料解读：电气参数及替代型号推荐
2024-06-21

4
LTC1151C双通道±15V零漂移运算放大器全面解读
2024-06-21

7
CNX36手册解读：产品特性、应用及封装引脚详解
2024-06-21

4
PS9552资料解读：引脚信息、电气参数
2024-06-21

3

产品中心

服务支持

精选活动

关于我们

帮助中心

MCH285S/883

MCH285S/883 数据手册

与MCH285S/883相关器件

与MCH285S/883相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MCH285S/883

MCH285S/883 数据手册

与MCH285S/883相关器件

与MCH285S/883相关文章

您还可以找

您在本页遇到什么问题？