MBR1535CT THRU MBR1560CT
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
TO-220AB
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
♦ Dual rectifier construction, positive center tap
♦ Guardring for transient protection
0.185 (4.70)
0.175 (4.44)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.055 (1.39)
0.045 (1.14)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.560 (14.22)
0.530 (13.46)
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.330 (8.38)
0.635 (16.13)
0.625 (15.87)
PIN
1.148 (29.16)
1.118 (28.40)
2
1
3
0.110 (2.79)
0.100 (2.54)
0.160 (4.06)
0.140 (3.56)
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
0.560 (14.22)
0.530 (13.46)
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounces, 2.24 gram
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.35)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
PIN 2
PIN 1
PIN 3
CASE
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRWM
VDC
MBR1535CT MBR1545CT MBR1550CT MBR1560CT
UNITS
Volts
Volts
Volts
Maximum repetitive peak reverse voltage
Maximum working peak reverse voltage
Maximum DC blocking voltage
35
35
35
45
45
45
50
50
50
60
60
60
Maximum average forward rectified current
at TC=105°C
I(AV)
15.0
15.0
Amps
Amps
Peak repetitive forward current at TC=105°C per leg
(rated VR, 20KHZ sq.wave)
IFRM
Peak forward surge current 8.3ms single half sine-
wave superimposed on rated load per leg (JEDEC method)
IFSM
IRRM
150.0
Amps
Amps
Peak repetitive reverse surge current per leg (NOTE 1)
1.0
_
0.5
Maximum instantaneous forward voltage IF=7.5A,TC=25°C
0.75
per leg at
(NOTE 2)
IF=7.5A,TC=125°C
IF=15A,TC=25°C
IF=15A,TC=125°C
0.57
0.84
0.72
0.65
VF
_
Volts
_
Maximum instantaneous reverse current at rated
DC blocking voltage per leg
TC=25°C
(NOTE 2) TC=125°C
IR
0.1
15.0
1.0
50.0
mA
Voltage rate of change, (rated VR)
dv/dt
10,000
V/µs
Maximum thermal resistance per leg (NOTE 3)
RΘJA
RΘJC
60.0
3.0
°C/W
°C
Operating junction temperature range
Storage temperature range
TJ
-65 to +150
-65 to +175
TSTG
°C
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) 300µs, pulse width, 1% duty cycle
(3) Thermal resistance from junction to case and thermal resistance from junction to ambient
www.kersemi.com
4/98