19-3100; Rev 0; 12/07
MAX8814 Evaluation Kit
Evluates:MAX814
General Description
Features
♦ CCCV, Thermally Regulated Linear 1-Cell Li+
The MAX8814 evaluation kit (EV kit) is a fully assembled
and tested printed-circuit board (PCB) for evaluating
the MAX8814 28V linear Li+ battery charger. The
MAX8814 EV kit operates from an input supply range of
4.25V to 28V, but the IC disables charging if the input
voltage exceeds 7V to protect against unqualified or
faulty AC adapters. The MAX8814 EV kit features an
adjustable fast-charge current set by an external resis-
tor (R2). Other features include an active-low control
input (EN) and an active-low input power source detec-
tion output (POK). The IC also features a booting assis-
tant circuit that distinguishes input sources and battery
connection and provides an output signal (ABO) for
system booting.
Battery Charger
♦ No External MOSFET, Reverse Blocking Diode, or
Current-Sense Resistor
♦ Programmable Fast-Charge Current (1A
max)
RMS
♦ Proprietary Die Temperature Regulation Control
(+115°C)
♦ 4.25V to 28V Input Voltage Range with Input OVP
Above 7V
♦ Charge-Current Monitor for Fuel Gauging (ISET)
♦ Low Dropout Voltage (300mV at 500mA)
♦ Input Power-Source Detection Output (POK) and
Charge-Enable Input (EN)
Ordering Information
♦ Soft-Start Limits Inrush Current
♦ Output for Autobooting (ABO)
♦ Fully Assembled and Tested
PART
TYPE
MAX8814EVKIT+
EV Kit
+Denotes lead-free and RoHS-compliant.
Component List
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
2-pin header, 0.1in center
Sullins PEC36SAAN
1µF 10ꢀ, 35V X5R ceramic
capacitor (0603)
JU1
1
C1
1
Digi-Key S1012E-36-ND
Taiyo Yuden GMK107BJ105K
Not installed, 10kΩ 5ꢀ
resistors—PCB short (0402), lead free
Not installed, 0.1µF 10ꢀ, 10V X5R
ceramic capacitors (0402)
TDK C1005X5R1A104K
Taiyo Yuden LMK105BJ104K
Murata GRM155R61A104K
R1, R4
0
C2, C4
0
R2
R3
1
1
2.8kΩ 1ꢀ resistor (0402), lead free
1MΩ 5ꢀ resistor (0402), lead free
28V linear lit battery charger (8-pin,
TDFN, 2mm x 2mm)
Maxim MAX8814ETA+
(Top Mark: ABI)
2.2µF 10ꢀ, 10V X5R ceramic
capacitor (0603)
Taiyo Yuden LMK107BJ225K
Murata GRM188R61A225K
U1
—
1
1
C3
1
PCB: MAX8814 Evaluation Kit+
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Digi-Key Corp.
800-344-4539
770-436-1300
760-744-0125
408-573-4150
847-803-6100
402-563-6866
www.digikey.com
Murata Electronics North America, Inc.
Sullins Electronics Corp.
Taiyo Yuden
www.murata-northamerica.com
www.sullinselectronics.com/tek9.asp
www.t-yuden.com
TDK Corp.
www.component.tdk.com
www.vishay.com
Vishay
Note: Indicate that you are using the MAX8814 when contacting these component suppliers.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.