ABRIDGED
19-0681; Rev 2; 11/07
Smallest, All-Internal MOSFET, 7-Channel
DSC PMIC in Tiny 5mm x 5mm Thin QFN
MAX680
General Description
Features
♦ 95% Efficient Synchronous-Rectified DC-DC
The MAX8680 highly efficient complete power-supply
solution is designed for digital still cameras (DSCs) and
digital video cameras (DVCs). The device integrates
seven on-chip power MOSFET DC-DC converters with
up to 95% efficiency to power all critical power supplies
in DSC systems. Each converter also features True
Shutdown™, as well as internal compensation to mini-
mize external component count. The seven DC-DC
converter outputs are:
Converters
♦ 90% Efficient Boost-Buck Operation
♦ 85% Efficient DC-DC Converters for CCD, LCD,
WLED, and/or OLED
♦ Internal Compensation on All Channels
♦ True Shutdown on All Step-Up Converters
♦ Overload Protection
•
•
•
•
Step-up synchronous-rectified DC-DC converter
(SU). The MAX8680 is bootstrapped from V
♦ Soft-Start for Controlled Startup Current
.
SU
♦ Dropout Operation (100% Duty Cycle) on Step-
MAIN synchronous-rectified step-down DC-DC con-
verter (M) for DSP I/O supply voltage.
Down Converters
♦ Regulated Current Output for Up to 6 White LEDs
♦ PWM Dimming of WLED Current
♦ Adjustable LED Overvoltage Protection Up to 27V
♦ Transformerless Inverting Converter for CCD
DDRZ synchronous-rectified step-down DC-DC
converter (Z) for DSP DDR supply voltage.
Low-voltage (down to 1V) synchronous-rectified
step-down DC-DC converter (SD) for DSP core sup-
ply voltage.
♦ 2MHz Switching Frequency for Low-Voltage
Channels
•
High-voltage, step-up DC-DC converter with current
regulation and PWM dimming control (LEDBST) for
white LEDs (WLED).
♦
2ꢀ5% Switching Frequency Accuracy
♦ 1µA Shutdown Supply Current
♦ Power-On Voltage Tracking for Core and Main
•
•
High-voltage step-up DC-DC converter (CCDBST)
for CCD imagers or positive LCD bias supplies.
Outputs
♦ All Internal Power MOSFETs
♦ SDOK Power-OK Indicator
Transformerless inverting DC-DC converter (CCDINV)
for CCD imagers or negative LCD bias supplies.
The MAX8680 has an independent/simultaneous
power-on sequence of the CCDBST and CCDINV con-
verters. For a preset power-on sequence of CCDBST
before CCDINV, contact the factory.
Typical Operating Circuit
INPUT
2.7V TO 5.5V
V
V
5V
SU STEP-UP
SU
The MAX8680 operates with 1-cell lithium-ion (Li+) bat-
tery, two-AA cell, or dual-battery designs and is avail-
able in a 5mm x 5mm, 40-pin thin QFN package. The
MAX8680 operates over the -40°C to +85°C extended
temperature range.
BATT
ONSU
ONM
MAIN STEP-DOWN
3.3V
2.5V
MAIN
V
1.8V
SD STEP-DOWN
SD
Applications
V
DDRZ
DDRZ STEP-DOWN
ONSD
ONZ
DSCs and DVCs
PDAs and Portable Media Players
GPS Navigation Systems
MAX8680
SDOK
LEDBST
CCDBST
CCDINV
V
V
UP TO 6 WLEDs
+15V
LEDBST
ONLED
ONBST
ONINV
Ordering Information
CCDBST
TEMP
PKG
PART
PIN-PACKAGE
V
-7.5V
RANGE
CODE
CCDINV
-40°C to 40 Thin QFN-EP*
+85°C 5mm x 5mm x 0.8mm
MAX8680ETL+
T4055-2
Pin Configuration appears at the end of data sheetꢀ
+Denotes a lead-free package.
*EP= Exposed paddle.
True Shutdown is a trademark of Maxim Integrated Products, Inc.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at wwwꢀmaxim-icꢀcomꢀ