19-4113; Rev 1; 10/10
Single/Multiphase, Step-Down,
DC-DC Converter Delivers Up to 25A Per Phase
MAX86
General Description
Features
o Operating Range from 4.5V to 20V Input Supply
o 1% Reference Voltage Accuracy Over Temperature
The MAX8686 current-mode, synchronous PWM step-
down regulator with integrated MOSFETs operates from
a 4.5V to 20V input supply and generates an adjustable
output voltage from 0.7V to 5.5V while delivering up to
25A per phase.
o Reference Input (REFIN) for Output Tracking or
System Reference Voltage
o Adjustable Switching Frequency from 300kHz
The MAX8686 employs a peak current-mode architec-
ture that operates with an adjustable switching frequency
from 300kHz to 1MHz. An adjustable current-limit thresh-
old allows for optimization for different applications with
different load currents. Inductor current sense is
achieved either using an external sense resistor or using
a lossless inductor current-sense scheme. The foldback
and hiccup current limit reduces the power dissipation
during overload or short-circuit conditions and allows for
autorecovery when the fault condition is removed.
to 1MHz
o Single/Multiphase Operation Delivers Up to
25A/200A with Integrated MOSFETs
o Adjustable Current Limit
o Monotonic Output Voltage at Startup (Prebias)
o Output Sink and Source Current Capability
o Adjustable Soft-Start
The MAX8686 offers the ability to start up monotonically
even when there is a prebias output voltage. In addi-
tion, an adjustable soft-start capability allows for a con-
trolled turn-on. The MAX8686 features an accurate 1%
reference and offers a reference input that allows for a
higher accuracy reference to be used for voltage track-
ing applications such as DDR memory.
o Thermal-Overload Protection
o Output Overvoltage Protection
o Thermally Enhanced 6mm x 6mm TQFN
Package (4W)
Ordering Information
The MAX8686 can be paralleled (up to eight) together
in a true multiphase mode to deliver up to 200A of out-
put current. When operating in this mode, this device
achieves better than 10% current balance between
phases at full load. The MAX8686 supports program-
mable phase shedding to improve system efficiency
during light load conditions.
PART
TEMP RANGE
PIN-PACKAGE
MAX8686ETL+
-40°C to +85°C
40 TQFN-EP*
+Denotes a lead-free package.
*EP = Exposed pad.
Typical Application Circuit
Other features include an enable input and a power-OK
(POK) indicator used for power sequencing. The
MAX8686 also features latch overvoltage protection
that turns on the low-side MOSFET when the output
voltage exceeds 120% of the nominal voltage. The
MAX8686 is offered in a thermally enhanced 40-pin,
6mm x 6mm TQFN package.
V
IN
= 12V
IN
BST
LX
V
= 1.2V/25A
OUT
PGND
RS+
RS-
REFIN
Applications
MAX8686
POL Power Supplies
Module Replacements
Telecom Equipment
Networking Equipment
Servers
CS+
CS-
POK
PHASE/REFO
COMP
POK
OUTPUT
EN/SLOPE
ENABLE
INPUT
DDR Memory
FREQ
SS GND
ILIM
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.