Click here to ask an associate for production status of specific part numbers.
Complete System PMIC, Featuring
MAX77714
13 Regulators, 8 GPIOs, RTC, and Flexible
Power Sequencing for Multicore Applications
General Description
Benefits and Features
The MAX77714 is a complete power-management IC
(PMIC) for portable devices using System-on-Chip (SoC)
applications processors.
● Highly Integrated
• 4x Buck Regulators
• SD0/1 Peak Efficiency > 90% at 3.6V 1.1V
• SD2/3 Peak Efficiency > 93% at 3.6V 1.8V
• Supports LDDR4x Memory requirements
• 9x Low-Dropout Linear Regulator
• Eight GPIOs
IN,
IN,
OUT
OUT
Two 2A (SD2/3), one 3A (SD1), and one 4A (SD0) step-
down regulator switch at 2MHz, allowing the use of small
magnetic components. The output voltages for SD0 and
SD1 are programmable from 0.26V to 1.52V in 10mV
steps. The output voltage for SD2 is programmable from
0.6V to 2.194V in 6.5mV steps. The output voltage for SD3
is programmable from 0.6V to 3.78V in 12.5mV steps.
• Real-Time Clock
• Backup Battery Charger
• Bidirectional Reset I/O
• Interrupt Output
Nine low-dropout (LDO) linear regulators supply power to
various system blocks. Each LDO features a programma-
ble active-discharge circuit in shutdown. All LDOs feature
two soft-start rates to limit inrush current during startup.
• System Watchdog Timer
● Flexible and Configurable
2
• I C-Compatible Interface
• Factory OTP Options Available
• Flexible Power Sequencer
• Configurable Power-Up/Power-Down/Sleep Mode
Entry/Exit Timing
Eight programmable GPIOs can be programmed as gen-
eral purpose inputs (GPI), general purpose outputs
(GPO), or alternate modes for additional functionalities.
• Highly Configurable GPIO ALT Modes
• Three Resources Can Be Configured as 32kHz
Oscillator Output
The real-time clock (RTC) with an external crystal oscil-
lator provides time keeping and alarm wake-up functions.
An internal silicon oscillator is available for systems that
do not want to use the crystal oscillator. In addition, a
watchdog timer is integrated for system monitoring pur-
poses.
• Four Resources Can Be Configured on FPS
• One Resource Can Be Configured as ACOK
Input
● Low Power
An integrated ON/OFF controller, in combination with flex-
ible power sequencer (FPS), provides maximum flexibility
in setting power-up/down sequences with minimal inter-
vention from the applications processor.
• Low I of 85μA in Sleep Mode
Q
• SD0/1 Low-Power Quiescent Current is 10μA
• SD2/3 Low-Power Quiescent Current is 5μA
• LDO Low-Power Quiescent Current is 1.5μA
The 70-bump, 4.1mm x 3.25mm x 0.7mm, 0.4mm pitch
wafer-level package (WLP) is ideal for space constrained
applications.
● Small Size
• 70-Bump, 0.4mm Pitch, 10x7 Ball Array WLP,
4.1mm x 3.25mm x 0.7mm Package Size
Factory-programmable options allow the MAX77714 to be
tailored for many applications. Contact the factory for
more information about programmable options; minimum
order quantities may apply.
2
• 230mm Total Solution Size
Applications
● Drones
● Smartphones/Tablet PCs
● Handheld Gaming Devices
● AR/VR Headsets
● Streaming Devices/Set-Top Boxes
● Home Automation Hubs
● Digital Cameras
● Automotive Aftermarket Accessories
19-100241; Rev 4; 5/23
Ordering Information appears at end of data sheet.
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2023 Analog Devices, Inc. All rights reserved.