EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX38902A/MAX38902B/
MAX38902C/MAX38902D
12μV
Low Noise 500mA
LDO Linear Regulator
RMS
General Description
The MAX38902A/B/C/D are low-noise, linear regulators
Benefits and Features
● 1.7V to 5.5V Input Voltage Range
that deliver up to 500mA of output current with only
● 0.6V to 5.3V Output Voltage Range
12µV
of output noise from 10Hz to 100kHz. These
RMS
● 12µV
Output Noise, 10Hz to 100kHz
RMS
regulators maintain ±1% output accuracy over a wide
input voltage range, requiring only 100mV of input-to-
output headroom at full load. The 365µA no-load supply
current is independent of drop-out voltage.
● 365µA Operating Supply Current
● 70dB PSRR at 10kHz
● 500mA Maximum Output Current
The MAX38902Ahave nine, pin-selectable output voltages
1.2V, 1.5V, 1.8V, 2.5V, 3.0V, 3.1V, 3.3V, 4.0V, and 5V. The
MAX38902B/C have a resistor adjustable output voltage
in the range of 0.6V to 5.3V. The MAX38902B also
includes an active-low POK output.
● ±1% DC Accuracy Over Load, Line,
and Temperature
● 100mV (Max) Dropout at 500mA Load (3.6V )
IN
● < 0.1µA Shutdown Supply Current
● Stable with 2µF (Min) Output Capacitance
● Programmable Soft-Start Rate
The MAX38902D have factory-preset output voltages
ranging from 0.7V to 5V. All versions include a programmable
output soft-start rate, output overcurrent and thermal
overload protection.
● Overcurrent and Overtemperature Protection
● Output-to-Input Reversed Current Protection
● POK Output
The MAX38902A/B are offered in an 8-pin TDFN package,
while the MAX38902C/D are offered in a 2 x 3, 0.4mm
wafer-level package (WLP).
● Pin-to-Pin compatible with MAX8902 (TDFN)
● 1.22mm x 0.82mm, 2 x 3 Bump, 0.4mm Pitch WLP,
Applications
● Communication Circuitry
or 2mm x 2mm 8-pin TDFN Package
● Audio Systems
Ordering Information appears at end of data sheet.
● High-Resolution Data Acquisition Systems
19-100191; Rev 4; 10/18