EVALUATION KIT AVAILABLE
MAX15009/MAX15011
300mA LDO Regulators with
Switched Output and Overvoltage Protector
General Description
Features
● 300mA LDO Regulator, Switched Output, and OVP
The MAX15009 includes a 300mA LDO regulator, a
switched output, and an overvoltage protection (OVP)
controller to protect downstream circuits from high-
|voltage load dump. The MAX15011 includes only the
300mA LDO regulator and switched output. Both devices
operate over a wide supply voltage range from 5V to 40V
and are able to withstand load-dump transients up to
45V. The MAX15009/MAX15011 feature short-circuit and
thermal-shutdown protection.
Controller (MAX15009)
● 300mA LDO Regulator and Switched Output
(MAX15011)
● 5V to 40V Wide Operating Supply Voltage Range
● 45V Load Dump Protection
● 67μA Quiescent Current LDO Regulator
● OVP Controller Disconnects or Limits Output Voltage
During Battery Overvoltage Conditions
The 300mA LDO regulator consumes 67μA quiescent
current at light loads and is well suited to power
battery applications. The LDO features independent
enable and hold inputs, as well as a microprocessor (μP)
reset output with adjustable reset timeout period.
● LDO Regulator with Enable, Hold, and Reset
Features
● Internal 0.28Ω (typ) n-Channel Switch for Switched
Output
● 100mA Switched Output with Adjustable Current-Limit
The switched output of the MAX15009/MAX15011
Blanking/Autoretry Delay
incorporates a low R
(0.28Ω, typ) pass transistor
DS(ON)
switch internally connected to the output of the LDO regu-
lator. This switch features accurate current-limit sensing
circuitry and is capable of controlling remote loads. The
MAX15009/MAX15011 feature an adjustable current limit
and a programmable delay timer to set the overcurrent
detection blanking time of the switch and autoretry timeout.
Ordering Information
PIN-
PACKAGE
PKG
CODE
PART
TEMP RANGE
MAX15009ATJ+ -40°C to +125°C 32 TQFN-EP* T3255-4
MAX15011ATJ+ -40°C to +125°C 32 TQFN-EP* T3255-4
The MAX15009 OVP controller operates with an external
enhancement mode n-channel MOSFET. While the moni-
tored voltage remains below the adjustable threshold, the
MOSFET stays on. When the monitored voltage exceeds
the OVP threshold, the OVP controller quickly turns off the
external MOSFET. The OVP controller is configurable as
a load-disconnect switch or a voltage limiter.
+Denotes a lead(Pb)-free/RoHS-compliant package.
For tape and reel, add a T after “+.”
*EP = Exposed pad.
Pin Configurations
TOP VIEW
The MAX15009/MAX15011 are available in a thermally
enhanced, 32-pin (5mm x 5mm), TQFN package and
are fully specified over the -40°C to +125°C automotive
operating temperature range.
24 23 22 21 20 19 18 17
16
15
HOLD 25
EN_LDO
FB_LDO
N.C. 26
14 N.C.
27
28
29
30
31
32
OUT_SW
OUT_SW
N.C.
SOURCE
GATE
13
12
Applications
● Multimedia Power Supply
MAX15009
11 N.C.
N.C.
*EP
7
10 FB_PROT
N.C.
+
9
CT
N.C.
1
2
3
4
5
6
8
TQFN
(5mm x 5mm)
*EP = EXPOSED PAD
Pin Configurations continued at end of data sheet.
Typical Operating Circuits and Selector Guide appear at
end of data sheet.
19-0923; Rev 2; 11/14