MAX14634/MAX14680
Ultra-Low On-Resistance and Compact
Bidirectional Battery Switches
Functional Diagram
INTERNAL BIAS
CIRCUIT
PWRB
GND
PWRA
EN/(EN)
R
PD
MAX14634
MAX14680
( ) MAX14680 ONLY
Detailed Description
Ordering Information
The MAX14634/MAX14680 bidirectional battery switches
feature reverse blocking capability to isolate the battery
from the system. These internal switches feature ultra-
low 7mI(typ) on-resistance and operate from a +2.3V to
+5.5V input voltage range, making these devices ideal
as battery-disconnect switches for high-capacity battery
applications. The slew-rate controlled switches are also
ideal for a large load capacitor as well as high-current
load switching applications.
TEMP
RANGE
TOP
MARK
PIN-
PACKAGE
PART
MAX14634EWC+T -40NC to +85NC
MAX14680EWC+T -40NC to +85NC
ACO
ACV
12 WLP
12 WLP
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel
Chip Information
The devices are available in an ultra-small 12-bump
(1.3mm x 1.7mm, 0.4mm pitch) WLP package. The tiny,
low-profile package is suitable for space-limited portable
device applications. The devices operate over the -40NC
to +85NC extended temperature range.
PROCESS: BiCMOS
Package Information
Reverse-Current Blocking
The bidirectional FET switch prevents current flowing from
either power input to the other when the switch is disabled.
For the latest package outline information and land patterns (foot-
prints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
EN/EN Input
The MAX14634’s switch position is controlled by an EN
active-low logic input. The switch is on when EN is logic-
low and off when EN is logic-high. EN is internally pulled
PACKAGE PACKAGE OUTLINE
LAND
TYPE
CODE
NO.
PATTERN NO.
down to ground by R
.
PD
Refer to Application
12 WLP
W121F1+1
21-0542
Note 1891
The MAX14680’s switch position is controlled by an EN
active-high logic input. The switch is on when EN is logic-
high and off when EN is logic-low. EN is internally pulled
down to ground by R
.
PD
Maxim Integrated
6