Click here for production status of specific part numbers.
MAX14430–MAX14432
Four-Channel, Fast, Low-Power,
and 3.75kV Digital Isolators
3kV
RMS
RMS
General Description
Benefits and Features
● Robust Galvanic Isolation for Fast Digital Signals
The MAX14430/MAX14431/MAX14432 are fast, low power,
4-channel, digital galvanic isolators using Maxim’s propri-
etary process technology. These devices transfer digital
signals between circuits with different power domains
while using as little as 0.58mW per channel at 1Mbps with
a 1.8V supply. The MAX14430–MAX14432 have an iso-
• Up to 200Mbps Data Rate
• Continuously Withstands 445V
(V
)
RMS IOWM
• Withstands 3.75kV
SOIC Package
for 60s (V
) Narrow
ISO
RMS
• Withstands 3kV
for 60s (V
) QSOP Package
RMS
ISO
• Withstands ±10kV Surge between GNDA and
GNDB with 1.2/50μs Waveform Narrow SOIC
Package
• Withstands ±7.5kV Surge between GNDA and
GNDB with 1.2/50μs Waveform QSOP Package
• High CMTI (50kV/μs, Typical)
lation rating of 3kV
(narrow SOIC package) for 60 seconds. For applica-
(QSOP package) or 3.75kV
RMS
RMS
tions requiring 5kV
MAX14436.
of isolation, see the MAX14434-
RMS
The MAX14430–MAX14432 family offers all three pos-
sible unidirectional channel configurations to accom-
modate any 4-channel design, including SPI, RS-232,
RS-485, and digital I/O applications. Output enable for
the A side of the MAX14431R/S/U/V is active-low, making
them ideal for isolating a port on a shared SPI bus since
the CS signal can directly enable the MISO signal on the
isolator. All other devices in the family have the traditional
active-high enable.
● Low Power Consumption
• 1.1mW per Channel at 1Mbps with V
= 3.3V
DD
• 3.5mW per Channel at 100Mbps with V
= 1.8V
DD
● Options to Support a Broad Range of Applications
• 2 Data Rates (25Mbps, 200Mbps)
• 3 Channel Direction Configurations
• 2 Output Default States (High/Low)
Devices are available with a maximum data rate of either
25Mbps or 200Mbps and with outputs that are either
default-high or default-low. The default is the state the
output assumes when the input is either not powered or is
open-circuit. See the Ordering Information and Product
Selector Guide for suffixes associated with each option.
Independent 1.71V to 5.5V supplies on each side of the
isolator also make the devices suitable for use as level
translators.
• Two Packages (Narrow SOIC and QSOP)
Applications
● Isolated SPI Interface
● Fieldbus Communications for Industrial Automation
● Isolated RS-485/RS-422, CAN
● Battery Management
● Medical Systems
Safety Regulatory Approvals
The MAX14430–MAX14432 are available either in a
16-pin narrow-body SOIC package with 4mm of creep-
age and clearance, or in a smaller 16-pin QSOP package
with 3.8mm of creepage and clearance. The SOIC pack-
age material has a minimum comparative tracking index
(CTI) of 600V, which gives it a group 1 rating in creepage
table. The QSOP package material has a minimum CTI of
400V, which gives it a group 2 rating in creepage table. All
devices are rated for operation at ambient temperatures of
-40°C to +125°C.
● UL According to UL1577
● cUL According to CSA Bulletin 5A
Ordering Information appears at end of data sheet.
19-100198; Rev 3; 7/19