Self-Cooled
LZY-2+
High Power Amplifier
Features
• saturated power 32W typ.
• high power with low distortion, -45 dBc typ.
• wide bandwidth, usable 475 to 1050 MHz
• high gain, 47 dB typ.
• unconditionally stable
50Ω 32W 500 to 1000 MHz
• self protected against excessive drive, high case temp., reverse
• polarity and shorting/unshorting transients at dc input
• electronic shutoff by grounding the shut-off terminal, reduces output by 50 dB
• ungrounding the shutoff terminal restores full power within 40 ms
• cool operation with integral fan, 15° C typ. rise
• graceful degradation, +20 to +30V DC
LZY-2X+L
Model No.
Case Style
Connectors
Price (Qty.)
LZY-2+
BT451
SMA
$2195.00 ea. (1-9)
$2095.00 ea. (1-9)
• can withstand short and open circuit at output for 2 minutes while delivering 20 watts
Applications
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• AM/FM
• Linear Pulse
• Feed forward
• Multi-carrier amplification
• Broadband swept signal
Electrical Specifications
L
LZY-2+
Typ.
LZY-2X+
Parameter
Min.
500
40
Max.
1000
Min
500
40
Typ.
Max.
1000
Units
MHz
dB
Frequency Range
Gain
Gain Flatness
1.5
1.5
dB
Output Power at 1dB compression
Noise Figure1
+43
+45
8.0
+43
+45
8.0
dBm
dB
Output third order intercept point
Input VSWR
+54
2.0
+54
2.0
dBm
:1
Output VSWR
3.5
3.5
:1
DC Supply Voltage
Supply Current1
+28
+28
V
8.0
8.0
A
L Heat sink and fan not included. Alternative heat sinking and
heat removal must be provided by the customer to ensure proper
performance. See Application Note AN-60-004
1. At 20W output including operation of fan.
Open load is not recommended, potentially can cause damage.
Outline Drawing
Maximum Ratings
Parameter
Operating Temperature
Storage Temperature
DC Voltage
Ratings
-10°C to 50°C
-55°C to 100°C
+30V
Input RF Power (no damage)
+10 dBm
Permanent damage may occur if any of these limits are exceeded.
MOUNTING INFORMATION FOR MODELS WITHOUT HEATSINK.
inch
Outline Dimensions (
)
mm
A
B
C
D
E
.98
F
3.75
G
H
__
__
J
.31
7.87
K
1.48
37.59
L
1.48
37.59
M
__
__
N
__
__
P
2.95
74.93
Q
.5
R
6.00
S
5.1
T
wt
9.85
7.3
6.3
6.0
.13
.135 grams*
3.43 4130
250.19 185.42 160.02 152.40
24.89
95.25
3.30
12.70 152.40 129.54
*455 grams without heatsink
REV. B
M124323
LZY-2+
MCL
130624
Page 1 of 2
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com