Datasheet > 传感器/换能器 > 其他传感器/换能器> LZ23H3V1

LZ23H3V1

更新时间： 2024-01-26 20:52:19

品牌	Logo	应用领域
夏普 - SHARP		传感器换能器
页数	文件大小	规格书
20页	155K
描述
1/3-type Interline Color CCD Area Sensor with 1 090 k Pixels

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

LZ23H3V1 技术参数

生命周期：	Active	Reach Compliance Code：	unknown
风险等级：	5.84	Is Samacsys：	N
Base Number Matches：	1

LZ23H3V1 数据手册

PRECAUTIONS FOR CCD AREA SENSORS

3) To avoid generating static electricity,

a. do not scrub the glass surface with cloth or

plastic.

ø The contamination on the glass surface

should be wiped off with a clean applicator

soaked in Isopropyl alcohol. Wipe slowly and

gently in one direction only.

b. do not attach any tape or labels.

c. do not clean the glass surface with dust-

cleaning tape.

– Frequently replace the applicator and do not

use the same applicator to clean more than

one device.

4) When storing or transporting the device, put it in

a container of conductive material.

◊ Note : In most cases, dust and contamination

are unavoidable, even before the device

is first used. It is, therefore, recommended

that the above procedures should be

taken to wipe out dust and contamination

before using the device.

3. Dust and Contamination

Dust or contamination on the glass surface could

deteriorate the output characteristics or cause a

scar. In order to minimize dust or contamination on

the glass surface, take the following precautions :

1) Handle the CCD in a clean environment such

as a cleaned booth. (The cleanliness level

should be, if possible, class 1 000 at least.)

2) Do not touch the glass surface with the fingers.

If dust or contamination gets on the glass

surface, the following cleaning method is

recommended :

4. Other

1) Soldering should be manually performed within

5 seconds at 350 °C maximum at soldering iron.

2) Avoid using or storing the CCD at high tem-

perature or high humidity as it is a precise

optical component. Do not give a mechanical

shock to the CCD.

ø Dust from static electricity should be blown

off with an ionized air blower. For anti-

electrostatic measures, however, ground all

the leads on the device before blowing off

the dust.

3) Do not expose the device to strong light. For

the color device, long exposure to strong light

will fade the color of the color filters.

1...17 18 1920

下载PDF

与LZ23H3V1相关器件

型号	品牌	描述	获取价格	数据表
LZ23J3	SHARP	CCD Sensor, Rectangular, Through Hole Mount, 1.78 MM PITCH, WINDOWED, PLASTIC, DIP-16	获取价格
LZ23J3N	ETC	AREA CCD IMAGE ARRAY	获取价格
LZ23J3V	SHARP	1/2.7-type Interline Color CCD Area Sensor with 1 310 k Pixels	获取价格
LZ24	EBMPAPST	METAL FINGER GUARDS	获取价格
LZ2413	SHARP	1/4-type Color CCD Area Sensors with 270 k Pixels	获取价格
LZ2413A	SHARP	CCD Sensor, Rectangular, Through Hole Mount, 1.27 MM PITCH, WINDOWED, PLASTIC, DIP-14	获取价格