LTC3675/LTC3675-1
7-Channel Configurable
High Power PMIC
FeaTures
DescripTion
n
Four Monolithic Synchronous Buck DC/DCs
The LTC®3675/LTC3675-1 are a digitally programmable
high efficiency multioutput power supplies plus dual
string LED driver ICs optimized for high power single cell
Li-Ion/Polymer applications. The DC/DCs consist of four
synchronousbuckconverters(1A/1A/500mA/500mA),one
synchronous boost DC/DC (1A), and one buck-boost DC/
DC (1A) all powered from a 2.7V to 5.5V input. The 40V
LED driver can regulate up to 25mA of current through
two LED strings with up to 10 LEDs each. The LED driver
may also be configured as a general purpose high voltage
boost converter.
(1A/1A/500mA/500mA)
n
Buck DC/DCs Can Be Paralleled to Deliver Up to
2× Current with a Single Inductor
n
Independent 1A Boost and 1A Buck-Boost DC/DCs
2
n
Dual String I C Controlled 40V LED Driver
2
n
I C Programmable Output Voltage, Operating
Mode, and Switch Node Slew Rate for All DC/DCs
2
2
n
n
I C Read Back of DC/DC, LED Driver, Fault Status
I C Slave Address Options: LTC3675 = 0001001X,
LTC3675-1 = 0110100X
n
Maskable Interrupts to Report DC/DC, V and Die
IN
DC/DC enables, output voltages, switch slew rates and
operating modes may all be independently programmed
Temperature Faults
n
n
n
n
2
Pushbutton ON/OFF/RESET
over I C or used in standalone mode via simple I/O and
Always-On 25mA LDO
power-updefaults.ThebuckDC/DCsmaybeusedindepen-
dently or paralleled to achieve higher output currents with
a shared inductor. LED enable, 60dB brightness control
Low Quiescent Current: 16µA (All DC/DCs Off)
4mm × 7mm × 0.75mm 44-Lead QFN Package
2
and up/down gradation are programmed using I C. Alarm
levels for low V and high die temperature may also be
IN
applicaTions
2
programmed via I C with a maskable interrupt output to
n
High Power (5W to 10W) Single Cell Li-Ion/Polymer
monitor DC/DC and system faults.
Applications
n
Portable Industrial Applications, Handy Terminals,
Portable Instruments
Multioutput Low Voltage Power Supplies
Pushbutton ON/OFF/RESET control and a power-on reset
output provide flexible and reliable power-up sequencing.
The LTC3675/LTC3675-1 are available in a low profile
(0.75mm), thermally enhanced 44-lead 4mm × 7mm
QFN package.
n
L, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks
of Linear Technology Corporation and Hot Swap is a trademark of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
Typical applicaTion
SW1
SW2
0.425V TO V , 1A MAX
IN
2.7V TO 5.5V
V
IN
0.425V TO V , 1A MAX
IN
SW3
0.425V TO V , 500mA MAX
IN
0.425V TO V , 500mA MAX
3
2
I C
SW4
SW5
IN
LTC3675/
LTC3675-1
EN1
V
V
IN
IN
EN2
VOUT5
SWAB6
SWCD6
VOUT6
TO 5.35V, 1A MAX
EN3
DIGITAL
CONTROL
EN4
ENBB
IRQB
RSTB
WAKE
PBSTAT
2.65V TO 5.25V, 1A MAX
0.8V TO V , 25mA MAX
LDO_OUT
IN
V
IN
SW7
ONB
PUSH BUTTON
•
•
•
•
•
•
CT
LED1
LED2
0.01µF
EXPOSED PAD
UP TO 10 LEDS
PER STRING
36751 TA01
36751fc
1
For more information www.linear.com/LTC3675