LT1469
Dual 90MHz, 22V/µs
16-Bit Accurate Operational Amplifier
FEATURES
DESCRIPTION
The LT®1469 is a dual, precision high speed operational
amplifierwith16-bitaccuracyand900nssettlingto150µV
for 10V steps. This unique blend of precision and AC
performance makes the LT1469 the optimum choice for
highaccuracyapplicationssuchasDACcurrent-to-voltage
conversion and ADC buffers. The initial accuracy and drift
characteristicsoftheinputoffsetvoltageandinvertinginput
bias current are tailored for inverting applications.
n
90MHz Gain Bandwidth, f = 100kHz
n
n
n
n
n
n
n
n
n
n
n
n
n
Maximum Input Offset Voltage: 125µV
Settling Time: 900ns (A = –1, 150µV, 10V Step)
22V/µs Slew Rate
Low Distortion: –96.5dB for 100kHz, 10V
Maximum Input Offset Voltage Drift: 3µV/°C
Maximum Inverting Input Bias Current: 10nA
Minimum DC Gain: 300V/mV
Minimum Output Swing into 2k: 12.8V
Unity-Gain Stable
Input Noise Voltage: 5nV/√Hz
Input Noise Current: 0.6pA/√Hz
Total Input Noise Optimized for 1kΩ < R < 20kΩ
Specified at 5V and 15V Supplies
V
P-P
The 90MHz gain bandwidth ensures high open-loop gain
at frequency for reducing distortion. In noninverting ap-
plications such as an ADC buffer, the low distortion and
DC accuracy allow full 16-bit AC and DC performance.
S
The 22V/µs slew rate of the LT1469 improves large signal
performance compared to other precision op amps in
applications such as active filters and instrumentation
amplifiers.
APPLICATIONS
n
Precision Instrumentation
The LT1469 is available in a space saving 4mm × 4mm
leadless package, as well as in small outline and DIP pack-
ages. A single version, the LT1468, is also available.
n
High Accuracy Data Acquisition Systems
n
16-Bit DAC Current-to-Voltage Converter
n
ADC Buffer
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
n
Low Distortion Active Filters
n
Photodiode Amplifiers
TYPICAL APPLICATION
16-Bit DAC I-to-V Converter and Reference Inverter for Bipolar Output Swing (VOUT = –10V to 10V)
15V
Bipolar Multiplying Mode (LTC1597)
Signal-to-(Noise + Distortion)
V
REF
40
+
DAC INPUT CODE = ALL ZEROS
1/2 LT1469
50
60
V
= 20V
REF
P-P
2.4µs SETTLING TIME
TO 1LSB ON 20V STEP
–
15pF
70
15pF
80
12k 12k
12k
12k
500kHz FILTER
–
16 BITS
DAC INPUTS
LTC1597
90
R
LPF
1/2 LT1469
+
V
OUT
100
110
80kHz FILTER
C
30kHz
FILTER
LPF
10
100
1k
10k
100k
–15V
1469 TA01
FREQUENCY (Hz)
1469 TA01a
1469fb
1