Protection Relays
Current Monitoring Relays and Transducers
LSR-0
Self-powered load sensor/low-cost
proof relay
Description
The LSR-0 is a self-powered load sensor intended for use as a
proof relay. It is used to verify that current is flowing as intended.
It has a guaranteed 15A pull-in current and 2.5A drop-out current.
Proof relays are typically used to interlock fans, compressors,
motors, heating elements and other devices. The LSR-0 is
self-powered, that is, it draws its power from the wire being
monitored so it does not require separate control power wiring.
Features
J
Self-powered
Wiring Diagram
J
Low cost proof relay
J
Can monitor up to 135A loads
TYPICAL WIRING DIAGRAM FOR REFRIGERATION AND
OIL FAILURE CONTROL
Specifications
Max Current Ratings
Functional Characteristics
Turn-on Threshold
Turn-off Threshold
Power
135A continuous
Fixed, 15A (max.)*
2.5A (min.)
Induced from conductor
600VAC rms
Isolation
Output Characteristics
Relay Output Rating:
Pilot Duty
General Purpose
General Characteristics
Temperature Range
Wire Size
480VA @ 240VAC
10A
TYPICAL WIRING DIAGRAM FOR BUILDING AUTOMATION
-20° to 70°C (-4° to 158°F)
#12-24AWG
Hole Size
Terminal Torque
Safety Marks
0.725” diameter
7 in.-lbs.
CSA, CSA-NRTL/C
CE
(File #46510)
Dimensions
H 42.42 mm (1.67”); W 58.42 mm (2.3”);
D 90.43 mm (3.56”)
TYPICAL WIRING DIAGRAM FOR BUILDING AUTOMATION
Weight
0.35 lb. (5.6 oz., 158.76 g)
Mounting Method
Four #6 screws 3/4” in length
*Conductors may be looped for smaller motor applications.
Caution: This product should not be relied upon solely for safety of life or safety applications.
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/lsr0
Rev: 1-A-062716