Over Voltage Protection IC Datasheet
LS0504EVT233
5V, 4A eFuse with Over Voltage and Over Current Protection
RoHS Pb
Description
The integrated load switching of the LS0504EVT233 provides
robust, input over-current protection to the downstream circuit
systems. The device comes with built-in over-voltage protection
and internal soft start. The switch’s low RDS(ON) minimizes the
system’s power loss.
In the event of input over-voltage, LS0504EVT233 immediately
turns off the switch to prevent the downstream system from the
stress of excessively high voltage. Internal soft-start ensures a
smooth output voltage ramp-up and limits the input inrush current.
Features & Benefits
■ Wide Input Voltage Range
■ Internal Soft-Start
■ Thermal Shutdown
from 2.7V to 6V
■ 30V Maximum Input / Output
Voltage
■ Continuous Current 3A; Peak
Current 4A
Pinout Designation
■ 50mΩ Low RDS(ON)
Protection Switch
■ Hiccup Mode Protection for
Over Load or Short Circuit
1
GND
IN
■ Built-in Over-Voltage
Protection
■ SOT23_3L Package
3
OUT
■ Pb-Free and RoHS compliant
■ Discharge Output at OVP
2
SOT23_3L TOP VIEW
Applications
■ Bluetooth Headsets
■ Wearable Device
■ Tablet PC
■ Charging Cable
Pin Description
■ Battery Devices
Pin no. Pin Name
Description
■ Adapter Powered Devices
1
2
GND
IN
Ground pin
Input pin
Output pin. OUT is discharged to GND through
an internal 80Ω resistor during OVP event.
3
OUT
Typical Applications
AC Adapter
5VOUT
IN
OUT
Functional Block Diagram
Cin
1μF
Cout
1μF
`
LS0504EV
OUT
IN
NC
Charge
Pump
Soft
Start
UVLO
R=80
Ω
GND
Vref
OVP
Driver
Discharge
Control
Current
Limit
GND
Thermal
Protection
© 2022 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 09/20/22