5秒后页面跳转
LP38855S-0.8 PDF预览

LP38855S-0.8

更新时间: 2024-02-10 19:00:50
品牌 Logo 应用领域
美国国家半导体 - NSC 稳压器
页数 文件大小 规格书
14页 357K
描述
1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable

LP38855S-0.8 数据手册

 浏览型号LP38855S-0.8的Datasheet PDF文件第2页浏览型号LP38855S-0.8的Datasheet PDF文件第3页浏览型号LP38855S-0.8的Datasheet PDF文件第4页浏览型号LP38855S-0.8的Datasheet PDF文件第5页浏览型号LP38855S-0.8的Datasheet PDF文件第6页浏览型号LP38855S-0.8的Datasheet PDF文件第7页 
December 2006  
LP38855  
1.5A Fast-Response High-Accuracy LDO Linear Regulator  
with Enable  
General Description  
Features  
The LP38855 is a high-current, fast-response regulator which  
can maintain output voltage regulation with an extremely low  
input to output voltage drop. Fabricated on a CMOS process,  
the device operates from two input voltages: VBIAS provides  
power for the internal bias and control circuits, as well as drive  
for the gate of the N-MOS power transistor, while VIN supplies  
power to the load. The use of an external bias rail allows the  
part to operate from ultra low VIN voltages. Unlike bipolar reg-  
ulators, the CMOS architecture consumes extremely low qui-  
escent current at any output load current. The use of an N-  
MOS power transistor results in wide bandwidth, yet minimum  
external capacitance is required to maintain loop stability.  
Standard VOUT values of 0.8V and 1.2V  
Wide VBIAS Supply operating range of 3.0V to 5.5V  
Stable with 10 µF ceramic capacitors  
Dropout voltage of 130 mV (typical) at 1.5A load current  
Precision Output Voltage across all line and load  
conditions:  
±1.0% for TJ = 25°C  
±2.0% for 0°C TJ +125°C  
±3.0% for -40°C TJ +125°C  
Over-Temperature and Over-Current protection  
Available in 5 lead TO-220 and TO-263 packages  
Custom VOUT values between 0.8V and 1.2V are available  
-40°C to +125°C Operating Temperature Range  
The fast transient response of this device makes it suitable  
for use in powering DSP, Microcontroller Core voltages and  
Switch Mode Power Supply post regulators. The LP38855 is  
available in TO-220 and TO-263 5-Lead packages.  
Dropout Voltage: 130 mV (typical) at 1.5A load current.  
Low Ground Pin Current: 14 mA (typical) at 1.5A load cur-  
rent.  
Applications  
ASIC Power Supplies In:  
- Desktops, Notebooks, and Graphics Cards, Servers  
- Gaming Set Top Boxes, Printers and Copiers  
Shutdown Current: 1 µA (typical) IIN(GND) when EN pin is low.  
Precision Output Voltage: ±1.0% for TJ = 25°C and ±2.0%  
for 0°C TJ +125°C, across all line and load conditions  
Server Core and I/O Supplies  
DSP and FPGA Power Supplies  
SMPS Post-Regulator  
Typical Application Circuit  
20202601  
© 2007 National Semiconductor Corporation  
202026  
www.national.com  

与LP38855S-0.8相关器件

型号 品牌 获取价格 描述 数据表
LP38855S-0.8/NOPB TI

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable 5-DDPAK/TO-263 -40 to 12
LP38855S-1.2 NSC

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855S-1.2 TI

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855S-1.2/NOPB TI

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855SX-0.8 NSC

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855SX-0.8/NOPB TI

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable 5-DDPAK/TO-263
LP38855SX-1.2 NSC

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855SX-1.2/NOPB TI

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855T-0.8 NSC

获取价格

1.5A Fast-Response High-Accuracy LDO Linear Regulator with Enable
LP38855T-0.8 TI

获取价格

0.8V FIXED POSITIVE LDO REGULATOR, 0.18V DROPOUT, ZFM5, TO-220, 5 PIN