LNK454/456-458/460
Absolute Maximum Ratings(1,4)
Notes:
DRAIN Pin Peak Current: LNK454................. 400 mA (750 mA)
LNK456................850 mA (1450 mA)
1. All voltages referenced to SOURCE, TA = 25 °C.
2. Normally limited by internal circuitry.
3. 1/16 in. from case for 5 seconds.
LNK457............. 1350 mA (2000 mA)
LNK458..............1750 mA (2650 mA)
4. The Absolute Maximum Ratings specified may be applied,
one at a time without causing permanent damage to the
product. Exposure to Absolute Maximum Ratings for
extended periods of time may affect product reliability.
LNK460..............2700 mA (5100 mA)
DRAIN Pin Voltage ………………………............. -0.3 V to 725 V
FEEDBACK Pin Voltage ……………………… ............ -0.3 to 9 V
BYPASS Pin Voltage ………………………................. -0.3 to 9 V
Lead Temperature(3) ................................................................260 °C
Storage Temperature …………………................... -65 to 150 °C
Operating Junction Temperature(2).........................-40 to 150 °C
Thermal Resistance
Thermal Resistance: D (SO-8C) Package:
Notes:
(qJA) ..................................100 °C/W(1), 80 °C/W(2) 1. Soldered to 0.36 sq. in. (232 mm2), 2 oz. (610g/m2) copper clad,
(qJC) ............................................... ........ 30 °C/W(3)
V (eDIP) Package:
with no external heat sink attached.
2. Soldered to 1 sq. in. (645 mm2), 2 oz. (610g/m2) copper clad,
with no external heat sink attached.
(qJA) .................................... 68 °C/W(1), 58 °C/W(2)
(qJC) ............................................... ...........2 °C/W(4) 3. Measured on the SOURCE pin close to plastic interface.
4. Measured at the surface of exposed pad.
Conditions
SOURCE = 0 V; TJ = -40 to +125 °C
(Unless Otherwise Specified)
Parameter
Symbol
Min
Typ
Max
Units
Control Functions
Average
TJ = 25 °C
110
122
6
134
kHz
%
Maximum Output
Frequency
fMAX
Peak-Peak Jitter
Average
TJ = 25 °C
25.8
28.7
6
31.6
kHz
%
Minimum Output
Frequency
fMIN
Peak-Peak Jitter
Maximum Switch
ON-Time
tON(MAX)
tON(MIN)
TJ = 25 °C
TJ = 25 °C
5.74
1.18
µs
µs
Minimum Switch
ON-Time
ON-Time Extension
Maximum Duty Cycle
FEEDBACK Pin Voltage
tEXT
DCMAX
VFB
5.2
70
µs
%
TJ = 25 °C
275
-1.3
290
305
-0.7
mV
FEEDBACK Pin Voltage
Triggering Cycle
Skipping Mode
VFB(SK)
520
mV
FEEDBACK Pin Voltage
for IC Latch-OFF
VFB(LO)
IFB
2000
-1.0
mV
Feedback Pull-up
Current
µA
6
PRELIMINARY
This document contains information on a new product. Specifications and information herein
are subject to change without notice.
Rev. A 06/10
www.powerint.com