LMV796, LMV797
www.ti.com
SNOSAU9D –MARCH 2006–REVISED MARCH 2013
LMV796/LMV796Q/LMV797 17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers
Check for Samples: LMV796, LMV797
1
FEATURES
DESCRIPTION
The LMV796/LMV796Q (Single) and the LMV797
(Dual) low noise, CMOS input operational amplifiers
offer a low input voltage noise density of 5.8 nV/√Hz
while consuming only 1.15 mA (LMV796/LMV796Q)
of quiescent current. The LMV796/LMV796Q and
LMV797 are unity gain stable op amps and have gain
bandwidth of 17 MHz. The LMV796/LMV796Q/
LMV797 have a supply voltage range of 1.8V to 5.5V
2
(Typical 5V Supply, Unless Otherwise Noted)
•
•
•
•
Input Referred Voltage Noise 5.8 nV/√Hz
Input Bias Current 100 fA
Unity Gain Bandwidth 17 MHz
Supply Current per Channel
–
–
LMV796/LMV796Q 1.15 mA
LMV797 1.30 mA
and can operate from
a
single supply. The
LMV796/LMV796Q/LMV797 each feature a rail-to-rail
output stage capable of driving a 600Ω load and
sourcing as much as 60 mA of current.
•
Rail-to-Rail Output Swing
–
–
@ 10 kΩ Load 25 mV from Rail
@ 2 kΩ Load 45 mV from Rail
The LMV796/LMV796Q family provides optimal
performance in low voltage and low noise systems. A
CMOS input stage, with typical input bias currents in
the range of a few femtoAmperes, and an input
common mode voltage range, which includes ground,
make the LMV796/LMV796Q and the LMV797 ideal
for low power sensor applications.
•
•
•
•
Guaranteed 2.5V and 5.0V Performance
Total Harmonic Distortion 0.01% @ 1kHz, 600Ω
Temperature Range −40°C to 125°C
LMV796Q is an Automotive Grade Product that
is AEC-Q100 Grade 1 Qualified and is
Manufactured on an Automotive Grade Flow.
The LMV796/LMV796Q/LMV797 are manufactured
using TI’s advanced VIP50 process. The LMV796/
LMV796Q are offered in 5–pin SOT-23 package. The
LMV797 is offered in 8–pin VSSOP package.
APPLICATIONS
•
•
•
•
•
•
Photodiode Amplifiers
Active Filters and Buffers
Low Noise Signal Processing
Medical Instrumentation
Sensor Interface Applications
Automotive
Typical Application
C
F
100
+
V
= 5.5V
R
F
I
IN
C
V+ = 2.5V
-
CM
+
-
10
+
V
OUT
C
D
V
B
CIN = CD + CCM
VOUT
1
- R
=
F
IIN
1k
100
FREQUENCY (Hz)
1
10
10k
100k
Figure 1. Photodiode Transimpedance Amplifier
Figure 2. Input Referred Voltage Noise vs.
Frequency
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated