LM94023
www.ti.com
SNIS150B –SEPTEMBER 2008–REVISED JUNE 2013
1.5V, micro SMD, Dual-Gain Analog Temperature Sensor with Class AB Output
Check for Samples: LM94023
1
FEATURES
DESCRIPTION
The LM94023 is a precision analog output CMOS
integrated-circuit temperature sensor that operates at
a supply voltage as low as 1.5 Volts. Available in the
very small four-bump DSBGA 0.8mm x 0.8mm) the
LM94023 occupies very little board area. A class-AB
output structure gives the LM94023 strong output
source and sink current capability for driving heavy
loads, making it well suited to source the input of a
sample-and-hold analog-to-digital converter with its
transient load requirements, This generally means the
LM94023 can be used without external components,
like resistors and buffers, on the output. While
operating over the wide temperature range of −50°C
to +150°C, the LM94023 delivers an output voltage
that is inversely porportional to measured
temperature. The LM94023's low supply current
makes it ideal for battery-powered systems as well as
general temperature sensing applications.
2
•
Low 1.5V Operation
•
Push-pull Output with 50µA Source Current
Capability
•
•
Two Selectable Gains
Very Accurate Over Wide Temperature Range
of −50°C to +150°C
•
•
•
•
Low Quiescent Current
Output is Short-circuit Protected
Extremely Small DSBGA Package
Footprint Compatible with the Industry-
standard LM20 Temperature Sensor
APPLICATIONS
•
•
•
•
•
•
•
Cell Phones
Wireless Transceivers
Battery Management
Automotive
A Gain Select (GS) pin sets the gain of the
temperature-to-voltage output transfer function. Either
of two slopes are selectable: −5.5 mV/°C (GS=0) or
−8.2 mV/°C (GS=1). In the lowest gain configuration,
the LM94023 can operate with a 1.5V supply while
measuring temperature over the full −50°C to +150°C
operating range. Tying GS high causes the transfer
function to have the largest gain for maximum
temperature sensitivity. The gain-select inputs can be
tied directly to VDD or Ground without any pull-up or
pull-down resistors, reducing component count and
board area. These inputs can also be driven by logic
signals allowing the system to optimize the gain
during operation or system diagnostics.
Disk Drives
Games
Appliances
KEY SPECIFICATIONS
•
•
•
•
Supply Voltage 1.5V to 5.5V
Supply Current 5.4 μA (typ)
Output Drive ±50 μA
Temperature Accuracy
–
–
–
–
20°C to 40°C ±1.5°C
–50°C to 70°C ±1.8°C
–50°C to 90°C ±2.1°C
–50°C to 150°C ±2.7°C
Connection Diagram
GND
(A2)
V
DD
(B2)
•
Operating Temperature −50°C to 150°C
GS
(A1)
V
OUT
(B1)
Connections
(Top View)
Figure 1. DSBGA
Top View
See Package Number YFQ0004
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated