LM53600-Q1, LM53601-Q1
SNAS660D – JUNE 2015 – REVISED MAY 2021
LM53600/01-Q1 0.65-A/1-A, 36-V Synchronous, 2.1-MHz
Automotive Step-Down DC/DC Converter
1 Features
3 Description
•
•
Qualified for automotive applications
The LM53600-Q1 and LM53601-Q1 synchronous
buck regulator devices are optimized for automotive
applications, providing an output voltage of 5 V, 3.3 V,
or an adjustable output. Load current up to 650 mA
is supported by the LM53600-Q1, while the LM53601-
Q1 supports up to 1000 mA. Advanced high-speed
circuitry allows the LM53600-Q1 and LM53601-Q1
devices to regulate from an input of 18 V to an output
of 3.3 V at a fixed frequency of 2.1 MHz. Innovative
architecture allows the device to regulate a 3.3-V
output from an input voltage of only 3.8 V. The input
voltage range up to 36 V, with transient tolerance of
up to 42 V, eases input surge protection design. An
open drain reset output, with filtering and delayed
release, provides a true indication of system status.
This feature negates the requirement for an additional
supervisory component, saving cost and board space.
Seamless transitions between PWM and PFM modes,
along with a quiescent current of only 23 µA, ensures
high efficiency and superior transient response at all
loads. Few external components are needed allowing
the generation of compact PCB layout. While the
LM53600-Q1 and LM53601-Q1 devices are Q1 rated,
electrical characteristics are ensured across a junction
temperature range of –40°C up to 150°C.
AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to 125°C
ambient operating temperature range
– Device HBM classification level 2
– Device CDM classification level C5
–40°C to 150°C junction temperature range
(available)
Wide operating input voltage: 3.55 V to 36 V (with
transient to 42 V)
Spread spectrum option available
2.1-MHz fixed switching frequency
Low quiescent current: 23 μA
Shutdown current: 1.8 µA
Adjustable, 3.3-V, or 5-V output
Maximum current load: 650 mA for LM53600-Q1,
1000 mA for LM53601-Q1
Pin-selectable forced PWM mode
RESET output with filter and delay release
External frequency synchronization
Internal compensation, soft start, current limit, and
UVLO
•
•
•
•
•
•
•
•
•
•
•
•
•
10-lead, 3-mm × 3-mm SON package with
wettable and non-wettable flanks
2 Applications
Device Information
•
•
•
Automotive camera applications
Automotive driver assistance systems
Automotive body applications
PART NUMBER
LM53600-Q1
PACKAGE(1)
BODY SIZE (NOM)
WSON (10)
3.00 mm x 3.00 mm
LM53601-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VPU
RPU
RESET
EN
AGND
FB
VSUPPLY
LM53600
LM53601
VIN
VCC
CVCC
SYNC/
MODE
BOOT
SW
CBOOT
CIN
L1
GND
COUT
(DAP)
Simplified Schematic – Fixed Output
Automotive 11.2-mm x 12.7-mm Layout
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.