Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM5037
SNVS578D –NOVEMBER 2008–REVISED MAY 2015
LM5037 Dual-Mode PWM Controller With Alternating Outputs
1 Features
3 Description
The LM5037 PWM controller contains all the features
1
•
•
•
High-Voltage (100-V) Start-up Regulator
necessary to implement balanced double-ended
power converter topologies, such as push-pull, half-
bridge and full-bridge. These double-ended
topologies allow for higher efficiencies and greater
power densities compared to common single-ended
topologies such as the flyback and forward. The
device can be configured for either voltage mode or
current mode control with minimum external
components. Two alternating gate drive outputs are
provided, each capable of 1.2-A peak output current.
The device can be configured to operate directly from
the input voltage rail over a wide range of 13 V to
100 V.
Alternating Outputs for Double-Ended Topologies
Current-mode or Feed-forward Voltage-mode
Control
•
•
•
•
Programmable Maximum Duty Cycle Limit
2% Feedback Reference Accuracy
High Gain-bandwidth Error Amplifier
Programmable Line Undervoltage Lockout (UVLO)
with Adjustable Hysteresis
•
Versatile Dual Mode Overcurrent Protection with
Hiccup Delay Timer
•
•
•
•
•
Programmable Soft-start Time
Additional features include programmable maximum
duty cycle limit, line undervoltage lockout, cycle-by-
cycle current limit and a hiccup mode fault protection
with adjustable timeout delay, soft-start and a 2 MHz
capable oscillator with synchronization capability,
precision reference and thermal shutdown.
Precision 5-V Reference Output
Current Sense Leading Edge Blanking
Resistor Programmed 2-MHz Capable Oscillator
Oscillator Synchronization Capability with Low-
Frequency Lockout Protection
Device Information(1)
2 Applications
PART NUMBER
LM5037
PACKAGE
BODY SIZE (NOM)
•
•
Telecom Power Converters
Industrial Power Converters
TSSOP (16)
5.00 mm × 4.4 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application
VIN
VOUT
LM5037
VIN
VCC
OUTA
OUTB
UVLO
REF
RT1/SYNC RAMP
RT2
RES
CS
COMP
Isolated
Feedback
SS
FB
PGND
AGND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.