Transmitter/receiver photo IC for optical link L10063-01, S10064-01
■ Mode output waveform
■ Output waveform example
INPUT SIGNAL DATA
tso
NO INPUT SIGNAL
OPTICAL INPUT
MODE OUTPUT
tos
Vmh
Vml
Voh
Vol
OUTPUT DATA
OUTPUT VOLTAGE
Vertical axis: 1 V/div., Horizontal axis: 5 ns/div.
(Ta=25 °C, Vcc=5.25 V, Pi= -26 dBm,
RL=50 kΩ, CL=15 pF, 45.2 Mbps)
KPICC0095EA
L10063-01
7
*
■ Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc= 4.75 to 5.25 V
)
Parameter
Current consumption
Symbol
Icc
Condition
Min.
-
Typ.
-
650
20
-
Max.
40
670
30
-2
-4.5
-
Unit
mA
nm
nm
dBm
dBm
dB
Vin= 2.0 V, Rcont=13.5 kΩ
Peak emission wavelength
Spectral half width (FWHM)
Fiber coupled optical output 1
Fiber coupled optical output 2
Extinction ratio
Rise time at pulse drive
Fall time at pulse drive
Pulse width variation
Pulse width distortion (average value)
p
630
-
-9
-12.5
10
-
λ
∆λ
Po1
Po2
re
tr
tf
,
Rcont=13.5 k *8 *9
Ω
,
Rcont=27 kΩ *8 *9
-
-
20 to 80 % *8
80 to 20 % *8
-
6.0
ns
-
-
6.0
ns
,
tpwv
50 % *8 *10
19.99
-1.39
-
-
24.29
+1.39
ns
ns
,
tapwd 50 % *8 *10
*7: A bypass capacitor (0.1 µF) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF capacitor
is also connected to the power supply line nearby.
The center of the optical fiber is aligned with the center of the package lens.
The distance between the fiber end and the lens top is 0.1 mm.
*8: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B.
*9: Average value measured with a plastic fiber ( 1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon.
φ
*10: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion).
■ Dimensional outlines (unit: mm)
L10063-01
S10064-01
8.98 ± 0.2 (INCLUDING BURR)
8.98 ± 0.2 (INCLUDING BURR)
2.72
1.57
0.97
7.2 ± 0.2 (INCLUDING BURR)
7.2 ± 0.2 (INCLUDING BURR)
(2 ×) d = 0.8 ± 0.05
5.92
2.94
(2 ×) d = 0.8 ± 0.05
5.92
2.94
ACTIVE
2.03 EMITTING POINT
2.03
AREA
0.6
a
a’
a’
a’
1.07
1.27
1.07
1.27
(4 ×) 0.5 ± 0.05
(4 ×) 0.5 ± 0.05
2.0 DEPTH 0.15 MAX.
(4 ×) 0.25 ± 0.05
2.54 2.54 2.54
2.54 2.54 2.54
(SPECIFIED AT THE LEAD ROOT)
(SPECIFIED AT THE LEAD ROOT)
Tolerance unless otherwise
noted: ±0.1, ±2˚
R0.3 MAX.
Values in parentheses indicate
reference value.
Pin No. L10063-01 S10064-01
V
IN
Vcc
GND
GND
Vcc
0.23
MODEOUT
Vout
Lead surface finish: Pd plating
Shaded area indicates burr.
+ 0.05
- 0.03
Cont
0.05
KPICA0067EA
a-a’ CROSS SECTION
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KPIC1065E01
May 2007 DN
2