KP1830
Vishay Roederstein
www.vishay.com
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-13 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General Data” of
this specification
4.3.1 Initial measurements
Capacitance at 1 kHz
Tangent of loss angle at 100 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: load 10 N; 10 s
No visible damage
Bending: load 5 N; 4 x 90°
No predrying
Method: 1A
Solder bath: 280 °C 5 °C
Duration: 5 s
4.14 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5.0 min 0.5 min
Recovery time: min. 1 h, max. 2 h
Visual examination
Capacitance
No visible damage
Legible marking
|C/C| 2 ꢀ of the value measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements
Capacitance at 1 kHz
Tangent of loss angle at 100 kHz
4.14 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
No visible damage
Legible marking
Rubbing material: cotton wool
Immersion time: 5.0 min 0.5 min
4.6 Rapid change of temperature
A = -55 °C
B = +105 °C
5 cycles
Duration t = 30 min
4.7 Vibration
Visual examination
Mounting:
No visible damage
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/sꢁ
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
Visual examination
Capacitance
No visible damage
|C/C| 2 ꢀ of the value measured in 4.6.1
Tangent of loss angle
As specified in section “Tangent of loss
angle” of this specification
Revision: 03-Feb-17
Document Number: 26016
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000