KC73129UBA

更新时间： 2024-01-14 21:19:52

品牌	Logo	应用领域
三星 - SAMSUNG		模拟IC 传感器图像传感器信号电路摄像机
页数	文件大小	规格书
18页	227K
描述
1/3 INCH CCD IMAGE SENSOR FOR CCIR CAMERA

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

KC73129UBA 技术参数

生命周期：	Obsolete	零件包装代码：	DIP
包装说明：	DIP,	针数：	16
Reach Compliance Code：	unknown	HTS代码：	8542.39.00.01
风险等级：	5.84	Is Samacsys：	N
模拟集成电路 - 其他类型：	ANALOG CIRCUIT	JESD-30 代码：	R-GDIP-T16
功能数量：	1	端子数量：	16
最高工作温度：	60 °C	最低工作温度：	-10 °C
封装主体材料：	CERAMIC, GLASS-SEALED	封装代码：	DIP
封装形状：	RECTANGULAR	封装形式：	IN-LINE
认证状态：	Not Qualified	最大供电电压 (Vsup)：	15.45 V
最小供电电压 (Vsup)：	14.55 V	标称供电电压 (Vsup)：	15 V
表面贴装：	NO	温度等级：	COMMERCIAL
端子形式：	THROUGH-HOLE	端子位置：	DUAL
Base Number Matches：	1

KC73129UBA 数据手册

1/3 INCH CCD IMAGE SENSOR FOR CCIR CAMERA

HANDLING INSTRUCTIONS

KC73129UBA

•

Static Charge Prevention

CCD image sensors can be easily damaged by static discharge. Before handling, be sure to take the following

protective measures.

— Use non chargeable gloves, clothes or material. Also use conductive shoes.

— When handling directly, use an earth band.

— Install a conductive mat on the floor or working table to prevent generation of static electricity.

— Ionized air is recommended for discharging when handling CCD image sensor.

— For the shipment of mounted substrates, use boxes treated for the prevention of static charges.

•

Soldering

— Make sure the package temperature does not exceed 80 °C.

— Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded 30W

soldering iron and solder each pin in less than 2 seconds. For repairs and and remount, cool sufficiently.

— To dismount an imaging device, do not use a solder suction equipment. When using an electronic

disoldering tool, use a thermal controller of the zero cross on/off type and connect to ground.

•

Dust and Dirt Protection

— Operate in the clean environments (around class 1000 will be appropriate).

— Do not either touch glass plates by hand or have object come in contact with glass surface. Should dirt

stick to a glass surface blow it off with an air blow(for dirt stuck through static electricity ionized air is

recommended).

— Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be caerful not to scratch

the glass.

— Keep in case to protect from dust and dirt. To prevent dew condensation, preheat or precool when moving

to a room with great temperature differences.

— When a protective tape is applied before shipping, just before use remove the tape applied electrostatic

protection. Do not reuse the tape.

•

Do not expose to strong light (sun rays) for long period, color filter are discolored.

Exposure to high temperature or humidity will affect the characteristics. accordingly avoid storage or usage in

such conditions.

•

CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.

1...15 16 1718

下载PDF

与KC73129UBA相关器件

型号	品牌	描述	获取价格	数据表
KC73129UC	SAMSUNG	Analog Circuit, 1 Func, CDIP16, CERDIP-16	获取价格
KC73129UCA	SAMSUNG	1/3 INCH CCD IMAGE SENSOR FOR PAL CAMERA	获取价格
KC73133	SAMSUNG	1/3 INCH CCD IMAGE SENSOR FOR VGA COMPATIBILITY	获取价格
KC73133C	SAMSUNG	1/3 INCH CCD IMAGE SENSOR FOR VGA COMPATIBILITY	获取价格
KC74125B	SAMSUNG	1/4 INCH CCD IMAGE SENSOR FOR EIA CAMERA	获取价格
KC74125C	SAMSUNG	1/4 INCH CCD IMAGE SENSOR FOR NTSC CAMERA	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

KC73129UBA

KC73129UBA 技术参数

KC73129UBA 数据手册

与KC73129UBA相关器件

与KC73129UBA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

KC73129UBA

KC73129UBA 技术参数

KC73129UBA 数据手册

与KC73129UBA相关器件

与KC73129UBA相关文章

您还可以找

您在本页遇到什么问题？