ISL32172E, ISL32272E, ISL32372E, ISL32174E,
ISL32274E, ISL32374E, ISL32179E
®
Data Sheet
December 16, 2008
FN6824.0
QUAD, ±16.5kV ESD Protected, 3.0V
Features
to 5.5V, Low Power, RS-422 Transmitters
• IEC61000 ESD Protection on RS-422 Outputs . . ±16.5kV
- Class 3 ESD Level on all Other Pins . . . . . . 12kV HBM
- High Machine Model ESD Level on all Pins . . . . . 700V
The Intersil ISL32x7xE are ±16.5kV IEC61000-4-2 ESD
Protected, 3.0V to 5.5V powered, QUAD transmitters for
balanced communication using the RS-422 standard. These
drivers have very low output leakage currents (±10µA), so
they present a low load to the RS-422 bus.
• Wide Supply Range . . . . . . . . . . . . . . . . . . . 3.0V to 5.5V
• Specified for +125°C Operation
• Available in Industry Standard Pinouts (‘172/’174) or in a
Space Saving QFN (ISL32179E) with Added Features
Driver (Tx) outputs are tri-statable, and incorporate a hot
plug feature to keep them disabled during power-up and
down. Versions are available with a common EN/EN
(‘172 pinout), a two channel EN12/EN34 (‘174 pinout), or a
versatile combination of individual and group channel
enables (see Table 1).
• Logic Supply Pin (V ) Eases Operation in Mixed Supply
L
Systems (ISL32179E Only)
• User Selectable Data Rate (ISL32179E Only)
• Hot Plug - Tx Outputs Remain Three-state During
Power-up and Power-Down
The ISL32372E, ISL32374E utilize slew rate limited drivers
which reduce EMI, and minimize reflections from improperly
terminated transmission lines, or from unterminated stubs in
multidrop and multipoint applications. Drivers on the other
versions are not limited, so they can achieve the 10Mbps or
32Mbps data rates. All versions are offered in Industrial and
Extended Industrial (-40°C to +125°C) temperature ranges.
• Low Tx Leakage Allows > 256 Devices on the Bus
• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 32Mbps
• Low Quiescent Supply Current . . . . . . . . . . 0.8mA (Max)
- Low Shutdown Supply Current. . . . . . . . . . . . . . . 60µA
• Current Limiting and Thermal Shutdown for Driver
Overload Protection
A 50% smaller footprint (compared to the TSSOP) is
available with the ISL32179E’s QFN package. This device
• Tri-statable Tx Outputs
also features a logic supply pin (V ), that sets the switching
L
points of the enable and DI inputs to be compatible with a
lower supply voltage in mixed voltage systems. Two speed
select pins allow the ISL32179E user to select from three
slew rate options for 460kbps, 10Mbps, or 32Mbps data
rates. Individual channel and group enable pins increase the
ISL32179E’s flexibility.
• 5V Tolerant Logic Inputs When V
• Pb-free (RoHS compliant)
≤ 5V
CC
Applications
• Telecom Equipment
• Motor Controllers / Encoders
• Programmable Logic controllers
• Industrial/Process Control Networks
TABLE 1. SUMMARY OF FEATURES
TX
PART
NUMBER
DATA RATE SLEW-RATE
HOT
PLUG?
ENABLE
TYPE
QUIESCENT LOW POWER
PIN
FUNCTION
4 Tx
(Mbps)
LIMITED?
V
PIN?
I
(mA)
SHUTDOWN? COUNT
L
CC
<1
ISL32172E
ISL32272E
ISL32372E
ISL32174E
ISL32274E
ISL32374E
ISL32179E
32
NO
YES
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
YES
EN, EN
EN, EN
NO
NO
NO
NO
NO
NO
YES
16
16
16
16
16
16
24
4 Tx
10
NO
<1
<1
<1
<1
<1
<1
4 Tx
0.46
32
YES
NO
EN, EN
4 Tx
EN12, EN34
EN12, EN34
EN12, EN34
4 Tx
10
NO
4 Tx
0.46
YES
4 Tx
32, 10, 0.46 SELECTABLE
INDIV. AND
GROUP
ENABLES
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.