ISL3170E,ISL3171E,ISL3172E,ISL3173E,ISL3174E,ISL3175E,ISL3176E,ISL3177E,ISL3178E
Truth Tables
Truth Tables (continued)
TRANSMITTING
RECEIVING
INPUTS
DE
INPUTS
OUTPUTS
OUTPUT
RE
X
DE
1
DI
1
Z
0
1
Y
1
RE
DE
Half Duplex Full Duplex
A-B
RO
0
0
0
0
0
0
X
X
X
≥ -0.05V
≤ -0.2V
1
0
1
X
1
0
0
0
0
X
X
High-Z
High-Z
High-Z *
Inputs
Open/Shorted
1
0
High-Z *
NOTE: *Shutdown Mode (See Note 9), except for ISL3171E,
ISL3174E, ISL3177E
1
1
0
1
0
1
X
X
High-Z *
High-Z
NOTE: *Shutdown Mode (See Note 9), except for ISL3171E,
ISL3174E, ISL3177E
Pin Descriptions
PIN
FUNCTION
RO
RE
Receiver output: If A-B ≥ -50mV, RO is high; If A-B ≤ -200mV, RO is low; RO = High if A and B are unconnected (floating) or shorted.
Receiver output enable. RO is enabled when RE is low; RO is high impedance when RE is high. If the Rx enable function isn’t
required, connect RE directly to GND or through a 1kΩ to 3kΩ resistor to GND.
DE
Driver output enable. The driver outputs, Y and Z, are enabled by bringing DE high, and are high impedance when DE is low. If the
Tx enable function isn’t required, connect DE to V
through a 1kΩ to 3kΩ resistor.
CC
DI
Driver input. A low on DI forces output Y low and output Z high. Similarly, a high on DI forces output Y high and output Z low.
Ground connection.
GND
A/Y
±15kV IEC61000 ESD Protected RS-485/422 level, noninverting receiver input and noninverting driver output. Pin is an input if
DE = 0; pin is an output if DE = 1.
B/Z
±15kV IEC61000 ESD Protected RS-485/422 level, Inverting receiver input and inverting driver output. Pin is an input if DE = 0;
pin is an output if DE = 1.
A
B
Y
Z
±15kV IEC61000 ESD Protected RS-485/422 level, noninverting receiver input.
±15kV IEC61000 ESD Protected RS-485/422 level, inverting receiver input.
±15kV IEC61000 ESD Protected RS-485/422 level, noninverting driver output.
±15kV IEC61000 ESD Protected RS-485/422 level, inverting driver output.
System power supply input (3.0V to 3.6V).
V
CC
NC
No Connection.
FN6307.4
June 10, 2008
3