IRMCF588
Dual Motor High Performance Sensorless Control IC
Description
IRMCF588 is a high performance Flash based motion control IC designed and optimized for complete air
conditioner control which contains two kinds of computation engines integrated into one chip. There are two
Motion Control Engines (MCETM) for sensorless control of permanent magnet motors and the other is an 8-bit
high-speed microcontroller (8051). The user can program a motion control algorithm by connecting these control
elements using a graphic compiler. Key components of the complex sensorless control algorithms, such as the
Angle Estimator, are provided as complete pre-defined control blocks. A unique analog/digital circuit and
algorithm fully supports single shunt or leg shunt current reconstruction. IRMCF588 performs a PFC (Power
Factor Correction) function in addition to the motor control. IRMCF588 comes in a 100 pin QFP package.
Features
Product Summary
Maximum clock input (fcrystal
Maximum Internal clock (SYSCLK)
Maximum 8051 clock (8051CLK)
•
Dual MCETM (Flexible Motion Control Engine) -
)
60 MHz
120MHz
30MHz
Dedicated computation engine for high efficiency
sinusoidal sensorless motor control
Built-in hardware peripheral for single or two shunt
current feedback reconstruction and OP amp
analog circuits
•
Sensorless control computation time 35 μsec@100MHz
MCETM computation data range
8051 Program Flash
16 bit signed
52KB
•
•
Integrated temperature sensor
Supports both interior and surface permanent
magnet motor sensorless control
8051/MCE Data RAM
MCE Program RAM
MCE Program OTP
2 x 4KB
2 x 12KB
16KB
•
Zero speed sensorless control for ultra-low speed
operation
GateKill latency (digital filtered)
PWM carrier frequency
A/D input channels
A/D converter resolution
A/D converter conversion speed
Analog output (PWM) resolution
UART baud rate (typ)
Number of digital I/O (max)
Package (lead free)
Typical 3.3V operating current
2 μsec
20 bits/ SYSCLK
15
•
•
•
•
Dedicated PFC PWM for digital PFC control
Loss minimization Space Vector PWM
Five-channel analog output (PWM)
Embedded 8-bit high speed microcontroller (8051)
for flexible I/O and man-machine control
JTAG programming port for emulation/debugger
Two Serial communication interface (UART)
I2Cserial interface
12 bits
2 μsec
8 bits
57.6K bps
31
•
•
•
•
•
•
•
Watchdog timer with independent internal clock
Internal 64 Kbyte flash plus 16Kbyte OTP memory
3.3V single supply
QFP100
50mA
Factory calibrated analog inputs
Standard Pack
Base Part Number
Package Type
Orderable Part Number
Form
Tray
Quantity
900
IRMCF588QTY
IRMCF588QTR
IRMCF588
LQFP100
Tape & Reel
1000
1
www.irf.com
© 2015 International Rectifier
February 20, 2015