MEMS Oscillator, Low Power, LVCMOS/HCMOS Compatible, 115.000 MHz to 137.000 MHz
IM802 Series
Features:
Typical Applications:
MEMS Technology
Direct pin to pin drop-in replacement for industry-standard packages
LVCMOS/HCMOS Compatible Output
Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2 mm x mm
Pb-free, Halogen-free, Antimony-free
RoHS and REACH compliant
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
Fast delivery times
Electrical Specifications:
Frequency Range
115.000 MHz to 137.000MHz
See Part Number Guide
Inclusive of Initial Tolerance, Operating Temperature Range, Load,
Voltage, and Aging
Frequency Stability
Operating Temperature
See Part Number Guide
See Part Number Guide
Supply Voltage (Vdd) ±10%
6.2 mA typ./ 7.5 mA max
5.5 mA typ./ 6.4 mA max
4.9 mA typ./ 5.6 mA max
No load condition, F = 125 MHz, Vdd = +2.8V, +3.0V, = +3.3 V
No load condition, F = 125 MHz, Vdd = +2.5 V
No load condition, F = 125 MHz, Vdd = +1.8 V
Current Consumption
OE Disable Current
Standby Current
4.2 mA max
4.0 mA max
Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state
Vdd = +1.8 V, OE = GND, Output in high-Z state
ꢀꢀꢀ
ST = GND, Vdd = +2.8 V to +3.3V
2.6 µA typ./ 4.3 µA max
1.4 µA typ./ 2.5 µA max
0.6 µA typ./1.3 µA max
ꢀꢀꢀ
ST = GND, Vdd = +2.5 V
ꢀꢀꢀ
ST = GND, Vdd = +1.8 V
Waveform Output
LVCMOS / HCMOS
45%/55%
Symmetry (50% of waveform)
All supply voltages
1.0 nSec typ./ 2.0 nSec max
1.3 nSec typ./ 2.5 nSec max
Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform
Vdd = +1.8 V from 20% to 80% of waveform
Rise / Fall Time
Logic “1”
90% of Vdd min
10% of Vdd max
70% of Vdd max
30% of Vdd min
Logic “0”
ꢀꢀꢀ
Input Characteristics
Input High Voltage
Pin 1, OE or ST
ꢀꢀꢀ
Pin 1, OE or ST
ꢀꢀꢀ
50kΩ min / 87kΩ typ. 150kΩ max
2.0MΩ min
Pin 1, OE logic high or logic or ST logic high
Pin 1, ST logic Low
Input Pull-up Impedance
ꢀꢀꢀ
Startup Time
5 mSec max
122 nSec max
5 mSec max
Measured from the time Vdd reaches its rated minimum value
F=137 MHz For other frequencies Toe = 100 nSec + 3 cycles
Enable Disable Time
Resume Time
ꢀꢀꢀ
Measured from the time ST pin crosses 50% threshold
1.9 pSec typ,/ 3.0 pSec max
1.8 pSec typ./ 4.0 pSec max
F= 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
RMS Period Jitter
12.0 pSec typ./ 25.0 pSec max
14.0 pSec typ./ 30.0 pSec max
F = 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
Peak-to-peak Period Jitter
0.5 pSec typ./ 0.9 pSec max
1.3 pSec typ./ 2.0 pSec max
Integration Bandwidth = 900 kHz to 7.5 MHz
Integration Bandwidth = 12 kHz to 20.0 MHz
RMS Phase Jitter (random)
Notes:
1. All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
2. Typical values are at +25ºC and nominal supply voltage.
3333
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev: 01/30/16_A
Page 1 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice