NOTES:
DO NOT
SCALE FROM
THIS PRINT
HW-XX-XX-XX-X-XXXX-SM-X-XXX
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. TUBE POSITIONS -05 THRU -36 ONLY; POSITIONS -02
THRU -04 TO BE LAYER PACKAGED.
3. MAXIMUM CUT FLASH: .020 [0.51] CUT FLASH TO BE
IN A NON-CRITICAL AREA LOCATED BETWEEN BODIES.
No OF POSITIONS
-02 THRU -36
OPTION #2
POLARIZED POSITION
SPECIFY OMITTED PIN
LEAD STYLE
OPTION #1
(SEE TABLE 1)
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
(-D: USE RTSM-50-DVU, USE LC-05-TM)
(-S: USE TSM-50-SV BODY, USE LC-08-TM-02)
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(-S: 3 POSITION USE TSM-03-SV-A,
MUST BE MOLDED TO POSITION)
(4-50 POSITIONS USE TSM-XX-SV-XX,
2 POSITIONS TO USE TSM-48-SV-04)
(-D: FOR MOLDED TO POSITION,
USE RTSM-50-DVU-XX BODY,
PLATING SPECIFICATION
36
02
-T: MATTE TIN ON CONTACT AND TAIL.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
.195 4.95
REF
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
35
01
MAX SWAY
(EITHER DIRECTION)
-S: SINGLE ROW
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
2
.100 2.54 REF
-TL: 250µ" TIN/LEAD ON CONTACT AND TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
AVAILABLE ON POS -02 THRU -36)
(-D: FOR STAKED, USE RTSM-50-DVU BODY,
3 POS MIN)
-TR: TAPE & REEL
02
72
(27 MAX POSITIONS)
-TM: MATTE TIN ON CONTACT AND TAIL.
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(MAX HEIGHT: .6875)
.295 7.49
REF
LEAVE BLANK FOR NO HOLD DOWN OPTION
(-D: USE RTSM-50-DVU, CAN BE CUT
TO POSITION, SEE FIG 1)
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
(-S: USE TSM-50-SV, CAN BE CUT
TO POSITION, SEE FIG 1)
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
01
71
2
MAX SWAY
.200 5.08 REF
SURFACE MOUNT
(EITHER DIRECTION)
ROW OPTION
-D: DOUBLE ROW
FIG 1
(USE RTSM-50-DVU FOR BOTTOM INSULATOR)
(USE WRTSM-50-DVU FOR TOP INSULATOR)
-S: SINGLE ROW
BOARD SPACE
"A" = -XXX
(SEE FIG 1 & TABLE 1)
MAX= C + .150
HW-XX-10-XX-X-675-SM SHOWN
(USE TSM-XX-S BODY FOR BOTTOM INSULATOR)
(USE WTSM-50-SV FOR TOP INSULATOR)
+.000[0.00]
(NO OF POS x .100[2.54])
- .015[0.38]
"B" .000[0.00] MIN
C
(NO OF POS -1) x .100[2.54]
[("C" + .150[3.81]) -A]
.025 0.64 SQ
REF (TYP)
.050 1.27
WTSM-50-SV
.100 2.54
.100 2.54 REF
T-1S6-XX-XX-2
WRTSM-50-DVU
"A"±.008[0.20]
BOARD OPTION
(.250[6.35] MIN)
(SEE TABLE 1)
"H" REF
+5°
-0°
(MAX = "C" + .150[3.81])
90°
.100 2.54 REF
.006[0.15]
RTSM-50-DVU
TSM-50-SV
.050 1.27
-S: SINGLE ROW
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL 94 V0, COLOR: BLACK
TERMINAL: PHOS BRONZE
HW BOARD TO BOARD ASSEMBLY
HWN-OX. X-XX-XX-X-XXXX-SM-X-XXX
DWG.
BY:
G PURVIS 03/12/1993 SHEET 1 OF 2
F:\DWG\MISC\MKTG\HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRW
5秒后页面跳转
VIPER22A的资料手册解读、引脚参数说明、代换型号推荐
ADS1256的资料手册解读、采集电压范围、读数变化原因分析及实际测量遇到的问题
MAX6675资料手册参数详解、引脚配置说明
LM258引脚图及功能介绍、主要参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
