HV98100/HV98101
Non-Dimmable, Off-Line, LED Driver with Low Total
Harmonic Distortions
Features
Description
The HV98100/HV98101 LED driver integrated circuit
(IC) is an off-line, high-power factor, buck-boost
controller targeted at general LED lighting products,
such as LED lamps and LED lighting fixtures with a
maximum power rating of about 15W.
• Good LED Current Regulation
- Better than 5% accuracy
• Valley Switching Buck-Boost Converter with
Power Factor Correction (PFC)
- 0.97 Power Factor (typical)
- 5% Total Harmonic Distortion (THD) (typical)
• Uses a Standard Off-the-Shelf Inductor
- No auxiliary winding required
• Single Input Voltage Range
Valley-switching buck-boost converters are preferred in
off-line applications since they reduce switching losses.
A typical solution is to pair a constant on-time control
scheme with valley switching to achieve both a
high-power factor and good efficiency. However, this
control scheme results in a higher total harmonic distor-
tion, and the actual value is dependent on the input and
output voltages. The HV98100/HV98101 uses a unique
control scheme to achieve a high-power factor and low
THD simultaneously under all line and load conditions,
while maximizing efficiency utilizing valley switching.
The average LED current is also controlled in a closed-
loop manner to achieve high LED accuracy.
- HV98100: 110 VAC ±15%
- HV98101: 230 VAC ±15%
• Supports 5W-15W Output Power
• Space-saving SOT-23-6L Package
Applications
• LED Lamps
Other unique features of the ICs are the bootstrap of
the IC supply voltage from the output, as well as the
unique valley-sensing scheme that allows the use of a
standard off-the-shelf inductor to minimize the overall
system cost.
• LED Lighting Fixtures
Applications with low-output voltage can be
accommodated using a coupled inductor.
Package Types
HV98100/HV98101
6-Lead SOT-23
GATE
PVDD
CS
IND
GND
1
6
5
4
2
3
COMP
See Table 3-1 for pin description.
2016 Microchip Technology Inc.
DS20005640A-page 1