HT45F3230
Proximity Sensing/Motor Driving Flash MCU
Features
CPU Features
• Operating voltage
♦
VDD=2.2V~5.5V
VBAT=3V~12V
♦
• Up to 0.5μs instruction cycle with 8MHz system clock at VDD=5V
• Power down and wake-up functions to reduce power consumption
• Oscillator types
♦
Internal High Speed RC – HIRC
♦
Internal 32kHz RC – LIRC
• Multi-mode operation: Normal, Slow, Idle and Sleep
• Fully integrated internal 8MHz oscillator requires no external components
• All instructions executed in one or two instruction cycles
• Table read instructions
• 61 powerful instructions
• 8-level subroutine nesting
• Bit manipulation instruction
Peripheral Features
• Flash Program Memory: 2K×16
• RAM Data Memory: 128×8
• True EEPROM Memory: 64×8
• Watchdog Timer function
• 16 bidirectional I/O lines
• Dual pin-shared external interrupts
• Multiple Timer Modules for time measurement, input capture, compare match output or PWM
output or single pulse output function
• Dual Time-Base functions for generation of fixed time interrupt signals
• 8 channel 12-bit resolution A/D converter with Internal Reference Voltage VBG
• Infrared LED constant-current driver with a driving current of up to 0.388A
• Infrared receiver circuit
♦
Two Operational Amplifiers
♦
One Comparator
• High voltage driver control and high voltage driver combination
• Over Current Protection function
• Integrated Battery Voltage Detection
• Low voltage reset function
• Low voltage detect function
• Flash program memory can be re-programmed up to 100,000 times
• Flash program memory data retention > 10 years
• True EEPROM data memory can be re-programmed up to 1,000,000 times
• True EEPROM data memory data retention > 10 years
• Package types: 16-pin NSOP, 24-pin SSOP
Rev. 1.60
6
September 22, 2020