Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-40 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 10 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 9 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 6.5 mΩ Max.
1000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 6 GHz.
Frequency 6 to 10 GHz.
Frequency 0 to 6 GHz.
No flashover or breakdown.
VSWR 1.2 Max.
VSWR 1.3 Max.
0.2 dB Max.
X
X
-
-
Insertion loss
Frequency 6 to 10 GHz.
0.3 dB Max.
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ 0.91 +0.005 by steel gauge. (HRM)
Insertion force
Extraction force 1.5 N Min.
Insertion force 63 N Max.
---- N Max.
-
-
X
-
0
X
X
X
Measured by applicable connector. (MCX)
extraction forces
Mechanical operation
Extraction force 8 N Min.
1)Contact resistance:
X
500 times insertion and extractions.
Center contact 21 mΩ Max.
Outer contact 13.5 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
-
-
X
X
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 96 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min.
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR
VSWR
1.2 Max. (Frequency 0 ~ 6 GHz.)
1.3 Max. (Frequency 6 ~ 10 GHz.)
Count
Description of revisions
Designed
Checked
Date
0
△
TO.KATAYAMA
Approved
17.04.05
17.04.05
17.04.05
17.04.05
Remark
RoHS COMPLIANT
TO.KATAYAMA
NK.OOSAWA
NK.OOSAWA
Checked
Designed
Drawn
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-327539-00-00
HRMJ-MCXP-1
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL311-0449-6-00
FORM HD0011-2-1