HI5812
®
Data Sheet
March 31, 2005
FN3214.6
CMOS 20 Microsecond, 12-Bit, Sampling
A/D Converter with Internal Track and
Hold
Features
• Conversion Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 20µs
• Throughput Rate . . . . . . . . . . . . . . . . . . . . . . . . 50 kSPS
• Built-In Track and Hold
The HI5812 is a fast, low power, 12-bit, successive
approximation analog-to-digital converter. It can operate
from a single 3V to 6V supply and typically draws just 1.9mA
when operating at 5V. The HI5812 features a built-in track
and hold. The conversion time is as low as 20µs with a 5V
supply.
• Guaranteed No Missing Codes Over Temperature
• Single Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . .+5V
• Maximum Power Consumption. . . . . . . . . . . . . . . . 25mW
• Internal or External Clock
The twelve data outputs feature full high speed CMOS
three-state bus driver capability, and are latched and held
through a full conversion cycle. The output is user
selectable, i.e., 12-bit, 8-bit (MSBs), and/or 4-bit (LSBs). A
data ready flag, and conversion-start input complete the
digital interface.
• Pb-Free Available (RoHS Compliant)
Applications
• Remote Low Power Data Acquisition Systems
• Digital Audio
An internal clock is provided and is available as an output.
The clock may also be over-driven by an external source.
• DSP Modems
• General Purpose DSP Front End
• µP Controlled Measurement System
• Professional Audio Positioner/Fader
Ordering Information
INL (LSB)
TEMP.
PART
(MAX OVER RANGE
PKG.
DWG. #
o
NUMBER
TEMP.)
±1.5
( C)
PACKAGE
Pinout
HI5812JIP
-40 to 85 24 Ld PDIP
E24.3
E24.3
HI5812
(PDIP, SOIC)
TOP VIEW
HI5812JIPZ
(See Note)
±1.5
-40 to 85 24 Ld PDIP*
(Pb-free)
DRDY
(LSB) D0
D1
1
2
3
4
5
6
7
8
9
24
V
HI5812JIB
±1.5
±1.5
-40 to 85 24 Ld SOIC
M24.3
M24.3
DD
23 OEL
22 CLK
21 STRT
HI5812JIBZ
(See Note)
-40 to 85 24 Ld SOIC
(Pb-free)
D2
HI5812KIB
±1.0
±1.0
-40 to 85 24 Ld SOIC
M24.3
M24.3
D3
20 V
19 V
-
REF
REF
D4
+
HI5812KIBZ
(See Note)
-40 to 85 24 Ld SOIC
(Pb-free)
D5
18
V
IN
D6
17 V
+
AA
*Pb-free PDIPs can be used for through hole wave solder
processing only. They are not intended for use in Reflow solder
processing applications.
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
D7
16
V
-
AA
D8 10
D9 11
15 OEM
14 D11 (MSB)
13 D10
V
12
SS
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.